| From | Message |
Rusty
Dodge Dakota
JOIN HERE
3/10/2003
19:55:45
|
 Subject: Fuel pressure gauge recommendation?
IP: Logged
Message:
I'm wanting to mount a permanent fuel pressure gauge next to my boost gauge. Any certain gauge I should get? Most of them I have found are temporary use/outside use only gauges. Also, where would it tap into the fuel line? The test valve is already in use. Thanks.
|
azdak
Dodge Dakota
JOIN HERE
3/10/2003
22:32:30
| RE: Fuel pressure gauge recommendation?
IP: Logged
Message:
autometer tap a tee after the fmu before the fuel rail it worked on the 4.7 turbo
|
Lello
Dodge Dakota
JOIN HERE
3/10/2003
22:40:22
|  RE: Fuel pressure gauge recommendation?
IP: Logged
Message:
Autometer has what's called an isolator allowing one inside but only for carburated versions which is max of 15 psi. Don't believe an isolater is available for a fuel injected motor. That particular gauge goes to 100 psi. Our motor is at about what?? 44-46 psi. Would you really want that inside risking a fuel leak?? I wouldn't. I mounted mine outside on the cowl with a braided #4 line and paintmatched the cup.....looks trick I think but I don't know how to post photos yet
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
