| From | Message |
David H.
Dodge Dakota
JOIN HERE
3/05/2003
12:46:25
|
 Subject: 5.7 liter hemi torque curve?
IP: Logged
Message:
Does anyone know where to find the torque curve for the new Hemi? I called Chrysler and they keep quoting me the peak hp and torque numbers that I already know! Chrysler obviously dyno tested this motor so the numbers must be available somewhere!
Thanks!
|
Steve-o
Dodge Dakota
JOIN HERE
3/05/2003
15:40:11
| RE: 5.7 liter hemi torque curve?
IP: Logged
Message:
I looked around for the curve myself a few weeks ago. A group of us were talking about it so I tried to find a graphic of the curve. I could only find some numbers, but no graphic on the curve. Hope you find it.
Steve
|
Demon Dakota
DakotaEnthusiast
3/05/2003
19:06:27
| RE: 5.7 liter hemi torque curve?
IP: Logged
Message:
It's gotta be pretty fat...definitely better than the 4.7L curve, and probably better than the 5.9L stock curve as well.
K&N Drop in AF (CAI during summer months)
True Dual exhaust and removed third cat
HO Cams & HO Intake
FASTMAN 70mm TB
Autolite 3923 Plugs
TPS @ .76 VDC
IAT Adjuster Mod
14.52@94.2 MPH at Silver Dollar Raceway
|
Hersbird
Dodge Dakota
JOIN HERE
3/06/2003
01:03:30
| RE: 5.7 liter hemi torque curve?
IP: Logged
Message:
When the hemi was first released on the 2500 series. The press release said it was over 300 ft-lbs at 1000 rpm, 325 ft-lbs at 1500 rpm, and peak 375 at 4200 rpm. Also based on 345 hp at 5400 rpm you know it's making 335 ft-lbs at 5400 rpm. With those 4 points I think you can get a pretty good estimate of a curve.
|
Demon Dakota
DakotaEnthusiast
3/06/2003
15:05:28
| RE: 5.7 liter hemi torque curve?
IP: Logged
Message:
Thanks for the info Hersbird
K&N Drop in AF (CAI during summer months)
True Dual exhaust and removed third cat
HO Cams & HO Intake
FASTMAN 70mm TB
Autolite 3923 Plugs
TPS @ .76 VDC
IAT Adjuster Mod
14.52@94.2 MPH at Silver Dollar Raceway
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
