| From | Message |
Brad
Dodge Dakota
JOIN HERE
3/04/2003
13:03:48
|
 Subject: Taylor Spiro & 3923's, OK combo for RT?
IP: Logged
Message:
Is this an OK combo to use on for a decent upgrade on lightly modded truck (99 RT CC, MOPAR PCM, home-brew intake,cat back duals)? Are these part #s correct?
Taylor Spiro-Pro 8mm - 74276(red) 74676(blue)
Autolite 3923's - part #?, set to .40
Borg warner cap and rotor - part #'s
Are the wires a direct fit or do they need some adjusting and/or and adapter of some kind (i.e. new looms, etc.)?
|
Joe
Dodge Dakota
JOIN HERE
3/04/2003
13:17:05
|  RE: Taylor Spiro & 3923's, OK combo for RT?
IP: Logged
Message:
Could you cross-post this to more forums please? Thanks.
|
MikeE
Dodge Dakota
JOIN HERE
3/04/2003
16:01:23
| RE: Taylor Spiro & 3923's, OK combo for RT?
IP: Logged
Message:
Take a look at my web site to see what this combo looks like:
http://www.t-bolt.org/Mike/_pages/dodge/engine.htm
MikeE
|
Fluid
Dodge Dakota
JOIN HERE
3/04/2003
20:03:44
| RE: Taylor Spiro & 3923's, OK combo for RT?
IP: Logged
Message:
They should be fine - a common "upgrade", although it is doubtful if you will notice any performance improvement unless your current plugs/wires are bad. When I installed 3923s in my R/T with about 3000 miles on it I saw a slightly better idle and it MAY have been a bit smoother accelerating....but not much. The money would be better spent on saving for a FIPK or other intake - these will give a noticeable and documented performance improvement. Change plugs every year....anyway.
I use MSD 8.5 wires - pre-cut and better than the three-year-old stock wires, which had begun to begrade.
|
big_torque
Dodge Dakota
JOIN HERE
3/04/2003
23:03:47
| RE: Taylor Spiro & 3923's, OK combo for RT?
IP: Logged
Message:
I got those items on my R/T , Brad. Works good for me. No HP gain though.
|
afi360
R/T
3/05/2003
05:22:18
| RE: Taylor Spiro & 3923's, OK combo for RT?
IP: Logged
Message:
i have taylor spiro's (red) and champion plugs. youre not going to notice any earth shattering gains, but price-wise its worth it. also, its a pretty decent place to start if you plan on adding msd or anything like that. stay away from the expensive bosch p+4 or splitfire plugs, man, the cheaper autolites work wayyy better than the bosch's, at least for me. good luck!
|
Brad
Dodge Dakota
JOIN HERE
3/05/2003
18:14:37
|  RE: Taylor Spiro & 3923's, OK combo for RT?
IP: Logged
Message:
Thank you all for your help.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
