| From | Message |
4.7L
Dodge Dakota
JOIN HERE
2/25/2003
11:27:02
|
 Subject: HO Cams on ebay
IP: Logged
Message:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33614&item=2405181977&rd=1
|
Texas Todd
Dodge Dakota
JOIN HERE
2/25/2003
12:23:22
| RE: HO Cams on ebay
IP: Logged
Message:
It's a good deal! If I didn't already have them, I'd go for it! I paid about $120 shipped, and made my own wedge. (some did it without it)
|
Chris
Dodge Dakota
JOIN HERE
2/25/2003
12:39:55
| RE: HO Cams on ebay
IP: Logged
Message:
These are awfully rusty. Also it doesn't say they are new...
Chris
|
Texas Todd
Dodge Dakota
JOIN HERE
2/25/2003
12:47:02
|  RE: HO Cams on ebay
IP: Logged
Message:
There were many people who had that surface rust on theirs when they had them shipped to them.
Why would anyone remove HO cams? But your right, it doesn't say the are new.
|
4.7l
Dodge Dakota
JOIN HERE
2/25/2003
15:26:34
| RE: HO Cams on ebay
IP: Logged
Message:
I emailed the guy he said they were never installed. They are brand new.
|
Texas Todd
Dodge Dakota
JOIN HERE
2/25/2003
15:35:56
| RE: HO Cams on ebay
IP: Logged
Message:
You'd have to figure it, huh? I was luckiy enough to get a set without the surface rust, but, I'd still slap them puppies in my 4.7, that surface rust will be long gone, and then it's in an oil immersed environment.
|
2THEXTRM
GenIII
2/25/2003
16:14:56
| RE: HO Cams on ebay
IP: Logged
Message:
You wouldn't clean off the rust before cams were installed? Would that be OK? I only ask, because my HO cams came rusty too and was wondering what to clean them off with.
Flowmaster cat back w/15 inch chrome tip, Volant Intake, Poweraid TB Spacer, Splitfire Plugs, full synthetic fluids
3 inch body/1.5 inch Block Lift, 305 70-16 X-Terrains on AR Terons, Pro Comp ES9000's
Grizzly double/single rollbar with (6) Hella's, Manik Nerfs, Line-X, Hard Work & $$$$$$$$$$
|
2THEXTRM
GenIII
2/25/2003
16:21:59
| RE: HO Cams on ebay
IP: Logged
Message:
PS- the HO cams on ebay are sold... I bought them so both my Daks are HO'd no to mention I needed the wedge tool:) Doing HO cams/intake on my 02 and just cams on my 01 with a performance puter for both when I find one.
Flowmaster cat back w/15 inch chrome tip, Volant Intake, Poweraid TB Spacer, Splitfire Plugs, full synthetic fluids
3 inch body/1.5 inch Block Lift, 305 70-16 X-Terrains on AR Terons, Pro Comp ES9000's
Grizzly double/single rollbar with (6) Hella's, Manik Nerfs, Line-X, Hard Work & $$$$$$$$$$
|
modain
Dodge Dakota
JOIN HERE
2/26/2003
02:38:10
|  RE: HO Cams on ebay
IP: Logged
Message:
Wow!!! Only $120 for the "buy it now" option? You scored big-time!
|
Chris
Dodge Dakota
JOIN HERE
2/26/2003
10:29:05
| RE: HO Cams on ebay
IP: Logged
Message:
I'm planning to sell my stock cams since I am getting rid of the truck, anyone want to make an offer to use these for a pair of regrinds???
Chris
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
