| From | Message |
Matt
Dodge Dakota
JOIN HERE
2/21/2003
19:30:00
|
 Subject: 1/4 mile ET guess??
IP: Logged
Message:
Could anyone give me a guess to what this pakage would do in the 1/4
1987 Long box Dakota lowered 2" by 4"
451BB with 9.5-1 comp with headers 727 tranny 3000 stall
8&3/4 with 3.91 gears with custom pinion snubber and caltracs
a couple rear leafs removed if it helps it grip
And slicks
Anyone with racing experience dare to take a geuss??
|
Fenris
Dodge Dakota
JOIN HERE
2/21/2003
19:50:30
| RE: 1/4 mile ET guess??
IP: Logged
Message:
mid-12's to low-13's?
|
hotplymouth
DakotaEnthusiast
2/21/2003
20:49:22
| RE: 1/4 mile ET guess??
IP: Logged
Message:
Most larger mopars with the same setup that will hook and go staight will turn 10.90s all day long. It will take some setting up to work but a 3400 lb b body and 69 dart with same run 10.80s and 10.90s all year at 1600 ft track. Email me if you want advise
|
Demon Dakota
DakotaEnthusiast
2/21/2003
23:36:34
| RE: 1/4 mile ET guess??
IP: Logged
Message:
I would put that at mid to low 11's with a competent driver. With a pro driver, high 10's easily.
K&N Drop in AF (CAI during summer months)
True Dual exhaust and removed third cat
HO Cams & HO Intake
FASTMAN 70mm TB
Autolite 3923 Plugs
TPS @ .76 VDC
IAT Adjuster Mod
14.52@94.2 MPH at Silver Dollar Raceway
|
big_torque
Dodge Dakota
JOIN HERE
2/22/2003
09:51:48
| RE: 1/4 mile ET guess??
IP: Logged
Message:
depends on what track too. I swear there are tracks that are different as much as 1/2 sec.
|
Dirkota
Dodge Dakota
JOIN HERE
2/22/2003
11:06:07
| RE: 1/4 mile ET guess??
IP: Logged
Message:
12.957 would be my guess. Is there a prize for the closest quess like they do with jelly beans in a jar?
2000 Dodge Dakota SLT, 3.9 liter V6, 5 Speed, V8 TB Swap, 70 Series Flowmaster Muffler, 180 HD Thermostat, Autolite 3923 Plugs, Edelbrock 10" breather with 3” element, IAT Relocating Mod, Echlin Cap & Rotor (brass contacts), Autolite 8mm wires, Lakewood traction bars, Synthetic motor oil
|
POWER HUNGRY
Dodge Dakota
JOIN HERE
2/22/2003
19:09:40
|  RE: 1/4 mile ET guess??
IP: Logged
Message:
It really depends on the specs of the motor??
Stock 440 heads, intake ,cam and traction= mid12s low13s
240+@0.50 cam, ported stock or aftermarket heads, m-1 or edelbrock air gap rpm intake, 850DP, 30" slick with a good lauch= 10s
|
Matt
Dodge Dakota
JOIN HERE
2/23/2003
10:21:14
| RE: 1/4 mile ET guess??
IP: Logged
Message:
Thanks for the reply guys. I was thinking about a M1 intake slightly ported 440 heads and a 750 or 850 Demon carb not realy sure about cam as but I want it to stay streetable.
|
dmagoo24
Dodge Dakota
JOIN HERE
2/23/2003
12:57:03
| RE: 1/4 mile ET guess??
IP: Logged
Message:
mmmm... jelly beans
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
