Forums
Forum Tools
|
 |
19:40:15 - 04/25/2024
Dakota Performance
| From | Message |
Carter
Dodge Dakota
JOIN HERE
2/03/2003
13:18:57
|
 Subject: Valve springs
IP: Logged
Message:
I have a 95 Dakota 5.2 with the mopar 272/278 cam mopar headers and full 3 inch exhaust with high flow cat, mopar computer, k+n air filter, and LT1 camaro 24 lbs. injectors and I seem to be running out of power at 5000 rpms. I was wondering if this would be in the beer keg intake or is it because I am still running stock springs. A little insight would be extremely helpful. Thanks
|
Anthony G
Dodge Dakota
JOIN HERE
2/03/2003
14:18:29
|  RE: Valve springs
IP: Logged
Message:
Well, you can either get a M1 2bbl w/extra Lrg Turtle or Cut the runners some on the Stock intake. If your valve springs are old, then sure you might see some valve float that can cause power loss at high rpm. Plus that Mopar cam isn't that great anyways. Just a tad better than the old R/T cam. The 24lb injectors seem to be around stock rated too.
P5007551 – 272/278 degree, .467”/.482” lift
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
