Forums
Forum Tools
|
 |
04:34:01 - 04/23/2024
Dakota Performance
| From | Message |
afi360
*R/T*
 
1/09/2003
02:55:14
|
 Subject: 'the fastman'
IP: Logged
Message:
hey guys, after swapping emails with 'the fastman' he seems like a very knowledgeable and straight up guy, thus far...has anyone ever worked with him, or had him do work?? if so, were you happy with it?? were you happy with him?? if you did have work done by him, could you post what it was, and how much it cost?? thanx
just trying to get a little insight before i go writing checks!
**in shadows growing wings**
|
kota on 20s
GenIII
1/09/2003
03:14:51
| RE: 'the fastman'
IP: Logged
Message:
he supplied the parts to the 408 stroker build up in the new truck'n mag.
he knows his stuff
~Eric
Superdupercharged, M-1, 1.7 RR's, 52mm TB, PPH Ceramic Headers & Y-pipe, 3" carsound cat, 3" dumped gibson
|
Neil
Dodge Dakota
JOIN HERE
1/09/2003
06:25:42
| RE: 'the fastman'
IP: Logged
Message:
I have met Dan several times and he has done installation work on my 99 5.9 Durango.(ported cerimic chrome M1, 1.7 rr, TB). Dan owns a Duranngo and is a member of the Durango Owners Club. He shows up at club events and has done work all over the US for Durango/Dakota/Ram/Jeep owners. He is an awsome guy and will stand by his work and work to make it correct. You'll find pretty much the same opinion every where. Go into the Durango Owners Club forum http://www.durangoclub.com/ and you'll get lots of replies for Dan. As a matter of fact there is one running from a guy who Dan just did work for.
As for cost, I don't have the numbers but his parts prices are good he is very fair for installation work. Trust me he did not charge me enough for the amount time he put in.
|
2THEXTRM
GenIII
1/09/2003
12:59:18
| RE: 'the fastman'
IP: Logged
Message:
Awesome guy to deal with, very knowledgeable and an excellent businessman. Delivers parts and responds to emails/phone calls promptly. I called to order a fastman TB for the wives truck and shot the sh!t with him for a half-hour, everything from our Daks, the new Hemi Engine to Hunting lol, very down-to-earth dude who takes the time with his customers!!!!!!!
Flowmaster cat back w/15 inch chrome tip, Volant Intake, Poweraid TB Spacer, Splitfire Plugs, full synthetic fluids
3 inch body/1.5 inch Block Lift, 305 70-16 X-Terrains on AR Terons, Pro Comp ES9000's
Grizzly double/single rollbar with (6) Hella's, Manik Nerfs, Line-X, Hard Work & $$$$$$$$$$
|
cbsdakota
*Mechanic*
1/09/2003
20:21:22
|  RE: 'the fastman'
IP: Logged
Message:
When I had my old Dak I bought a new 48mm stock TB to hand port. I left the bores at 48 but removed the lip around the bores and smoothed it out with a dremel. Then when reinstalling the shaft/blades, one of the screws broke off inside the shaft. I called Fastman, he said all I needed was the 46mm he makes, but I insisted I wanted to have a 48 (which he doesn't normally make). He took my TB and machine radiused the bores and installed his thinner shaft and blades for me. Also B/S'd on the phone for a long time. Really cool guy.
97 Dodge Ram SS/T, black w/ silver stripes, Carsound cat and 40 Series Flowmaster
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
