Forums
Forum Tools
|
 |
22:03:00 - 04/19/2024
Dakota Performance
| From | Message |
dakota matt
GenIII
 
12/23/2002
07:28:00
|
 Subject: done with mods
IP: Logged
Message:
After finally getting the headers and Y-pipe installed I am done with the performance mods. I will eventually get the Rancho 3" lift but that will have to wait untill I am no longer in Europe.
Numerous boards on this site where both helpfull with the installs and with information on the mods I was considering. Thanks for all the imputs from everyone. The MOPAR PCM was the biggest difference I noticed out of all the mods I have done. The most difficult ended up being th Y-pipe, also my last. I thought the headers would be hard but other then the studs not wanting to come out they weren't that bad. I have not had any DYNO tests done but I am hoping to. Nobody seems to know where I can get that done here in Italy. I will hopefully find a place soon.
MSD 6AL, SS blaster coil, 8.5mm wires, Accel cap and rotor, autolite 3923 plugs, K&N FIPK, 180 degree T-stat. Gibson single CAT-back, Carsound CAT, MOPAR PCM. Crower 1.7 RR's, F&B 50mm TB, M1 intake and turtle, Black Magic 150 electric fan, JBA ceramic coated headers, JBA Y-Pipe
|
Demon Dakota
DakotaEnthusiast
12/23/2002
10:05:23
|  RE: done with mods
IP: Logged
Message:
Talk to your friendly local Ferrari dealer. They'll know where to send ya!
K&N Drop in AF
True Dual exhaust and removed third cat
HO Cams & HO Intake
Modified TB
Autolite 3923 Plugs
TPS @ .76 VDC
IAT Adjuster Mod
14.52@94.2 MPH at Silver Dollar Raceway
|
dakota matt
GenIII
12/23/2002
10:34:26
| RE: done with mods
IP: Logged
Message:
Haha. I thought of that. There is one about 15 minutes from my apartment.
MSD 6AL, SS blaster coil, 8.5mm wires, Accel cap and rotor, autolite 3923 plugs, K&N FIPK, 180 degree T-stat. Gibson single CAT-back, Carsound CAT, MOPAR PCM. Crower 1.7 RR's, F&B 50mm TB, M1 intake and turtle, Black Magic 150 electric fan, JBA ceramic coated headers, JBA Y-Pipe
|
afi360
*R/T*
12/23/2002
22:25:22
| RE: done with mods
IP: Logged
Message:
congratulations and actually being able to say 'i'm done' with the mods...how much was shipping to italy?!
**in shadows growing wings**
|
dakota matt
GenIII
12/24/2002
06:17:52
| RE: done with mods
IP: Logged
Message:
I was lucky with the headers. Truck Performance was trying something new and offered free shipping. After a couple of e-mails I backed out of the "new" shipping method but still paid nothing for shipping. It did take two months for them to get here though. I was in Kuwait so it didn't matter. The Y-pipe was about $25-30. Alot of things are more then they should be because they actually only get shipped by the USPS to the east coast and the military ships them from there. The hard part sometimes is finding what I want from a company that will ship to an APO address. If they ship UPS only they won't ship to me. It sucks! Truck Performance nolonger ships to APO addresses and I have done alot of business through them so I was pretty angry when my Y-pipe order was cancelled by them and I had to search for a new place to buy it.
MSD 6AL, SS blaster coil, 8.5mm wires, Accel cap and rotor, autolite 3923 plugs, K&N FIPK, 180 degree T-stat. Gibson single CAT-back, Carsound CAT, MOPAR PCM. Crower 1.7 RR's, F&B 50mm TB, M1 intake and turtle, Black Magic 150 electric fan, JBA ceramic coated headers, JBA Y-Pipe
|
John Milner
Dodge Dakota
JOIN HERE
12/24/2002
12:35:29
| RE: done with mods
IP: Logged
Message:
Well, all you have to do now is get it "smogged" when you get back to states!! Good luck
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
