Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
02:50:07 - 03/29/2024

Dakota Performance
FromMessage
MTK
Unregistered
 Email

2/14/2001
11:42:10

Subject: rear suspension
IP: Logged

Message:
I have a 99 Dakots Club Cab. In my opinion the greaatest thing since sliced bread. Is there anyway I can soften the rear end a little for better rear downforce and traction and keep my present load capacity?



schulzie
Gen III
 Email User Profile

2/15/2001
17:22:50

RE: rear suspension
IP: Logged

Message:
I'm not sure on the softening part, but my dakota didn't come with a rear swaybar installed. I ordered one from JC Whitney. It was a Hellewig and the cost was somewhere around 140 dollars. It as worth every penny. The install was quite simple, just be carefull when loosening the clamps for the rear brake line to install the U-bolts. The clamps just pry up with a screwdriver. Off the line launch was slightly better, with less wheel hop, but accelerating around corners is much better. Plus the ride is great and it didn't affect load rating
Matt
98 Sport 3.9 5spd Breathing help



Ian Pendergrass
Gen III
 Email User Profile

2/16/2001
23:57:30

RE: rear suspension
IP: Logged

Message:
Schulzie do you think that sway bar will fit on a lowered 2000?

thanks

2000 Quad Cab 3.9L V6 2/4 Drop flowmaster

95DakotaV8
GenII
 User Profile

2/17/2001
07:18:32

RE: rear suspension
IP: Logged

Message:
Get some "velocity sensitive" shocks like the Edelbrock IAS, Rancho RSX or Pro Comp ES9000s (my choice). They will cushion the unloaded ride and not decrease the performance.

http://www.explorerprocomp.com/

KJR
1995 Dakota Club Cab SLT 4x4, 5.2L, 5spd, 3.90 rear end

schulzie
GenIII
 User Profile

2/18/2001
21:23:16

RE: rear suspension
IP: Logged

Message:
Ian
The end links on the sway bar are kindof long to get the right angle, but i think they would fit. They don't extend down below any other part of the truck. I'll measure the ground clearance on my truck, and you can subtract the drop. How did you drop you truck. I'm looking for a 2/4 drop also.
Matt
98 Sport 3.9 5spd breathing help



Ian Pendergrass
Gen III
 Email User Profile

2/19/2001
22:50:03

RE: rear suspension
IP: Logged

Message:
Schulzie new springs in the front and new spring hangers in the back. If I had it to do over I would go with Hotchkis.

2000 Quad Cab 3.9L V6 2/4 Drop flowmaster

Schulzie
GenIII
 Email User Profile

2/19/2001
23:46:38

RE: rear suspension
IP: Logged

Message:
I took a closer look at the end links today and it shouldn't be a problem. They don't extend below the shock mounts on the bottom of the axle or below the diff.
Ian - were you able to do the lowering yourself/what did it involve - special tools?
Matt
98 Sport 3.9 5spd Breathing help



RR
Unregistered


2/21/2001
10:19:08

RE: rear suspension
IP: Logged

Message:
With the bar installed and the truck sitting at its normal ride height the end links should be at 90 degrees to the bar. If its not you should be able to shorten the end links.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.