| From | Message |
Carter
Dodge Dakota
JOIN HERE
12/04/2002
23:35:33
|
 Subject: Headers for my 95 5 speed
IP: Logged
Message:
I have a 95 5.2 Dakota 5 speed and mopor only offers their headers for a 95 in an automatic. Can someone tell me what the difference is and if they will work.
|
rtdkota
R/T
12/05/2002
01:08:57
|  RE: Headers for my 95 5 speed
IP: Logged
Message:
BLAH.. Lies... Get a set of Doug Thorley's... they will fit your 5spd just fine. I had a 95 and ran those-- a little tight around the stearing box-- But are the correct headers for the 95 5spd.
www.truckperformance.com will probably have the lowest price--
Sam
RTDKOTA
|
b1llyw
DakotaEnthusiast
12/05/2002
05:32:35
| RE: Headers for my 95 5 speed
IP: Logged
Message:
Actually, Thorley specs different part numbers, same price, for auto vs. stick in a '95. Summit has the best price.
Bill White - 2002 QC 4x4, SLT , 4.7, 5 spd, 3.92 9.25, 1995 Dakota CC, 4x2, SLT, 318, 5 spd, 3.55 8.25
|
Carter
Dodge Dakota
JOIN HERE
12/05/2002
10:12:30
| RE: Headers for my 95 5 speed
IP: Logged
Message:
actually I was wondering if the automatic headers from Mopar will fit my 5 speed truck, a buddy of mine has a set off a 95 automatic truck and I can get them pretty cheap. I just want to know what the difference is. I think its the EGR system.
|
b1llyw
DakotaEnthusiast
12/05/2002
10:26:39
| RE: Headers for my 95 5 speed
IP: Logged
Message:
Both 95's would have EGR. I know part of the difference is in the y-pipe and how it goes around the respective trannies. I think there is also a difference relative to the steering shaft.
MOPAR used to have a separate part number for headers of a 95 318 5speed. It was discontinued a couple of years ago.
Bill White - 2002 QC 4x4, SLT , 4.7, 5 spd, 3.92 9.25, 1995 Dakota CC, 4x2, SLT, 318, 5 spd, 3.55 8.25
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
