Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
04:00:58 - 03/29/2024

Dakota Performance
FromMessage
pixelenvy
Dodge Dakota
JOIN HERE
 Email

11/14/2002
00:54:40

Subject: Home brew idea...
IP: Logged

Message:
Hey is there any way to secure pvc pipes/elbows from the inside? .. Have a look at this link

http://www.geocities.com/kotadude21/intake.html

This looks good but I was thinking maybe if you sanded down the inside of the openings about an inch in the cut a 2 inch slice of pipe and sanded the outside of that then you'd possibly have a seamless fit. The outside would have to be sanded and possibly filled with some sort of putty but would it work? .. if not is there another way?

thanks!
-m



Texas Todd
Dodge Dakota
JOIN HERE


11/14/2002
10:46:54

RE: Home brew idea...
IP: Logged

Message:
Why do you want to do this?

The inside of the PVC fittings is smooth, that's why the bent ones have a larger OD to allow the straight ones the keep the same ID thru-out.

I have the 4.7, and used fernco (larger diameter curve, and softer rubber, gives some)on the TB, to a straight PVC, painted, then to a fernco, etc.



nitroussteve
DakotaEnthusiast
 Email User Profile


11/14/2002
10:54:46

RE: Home brew idea...
IP: Logged

Message:
buy one of my intakes,forget that plastic pvc stuff.on search at ebay enter:dodge dakota intake
they are $89.99!

nitroussteve

FORGET STOCK,MODIFY TILL YOUR BROKE!

pixelenvy
Dodge Dakota
JOIN HERE
 Email

11/14/2002
10:59:46

RE: Home brew idea...
IP: Logged

Message:
send me a link nitroussteve, there seems to be 100 available. Texas Todd I just want it to look nice that's all, I don't want to sacrifice flow though so I had a few other ideas. Do you happen to have a photograph of your setup Todd?

thanks guys,
-Mike



nitroussteve
DakotaEnthusiast
 Email User Profile


11/14/2002
11:03:40

RE: Home brew idea...
IP: Logged

Message:
ebay item #1872607229



you'll love it!

FORGET STOCK,MODIFY TILL YOUR BROKE!

afi360
*R/T*
 Email User Profile


11/14/2002
11:24:59

RE: Home brew idea...
IP: Logged

Message:
made my own out of pvc and pvc cement, 4" toilet flange...a little ghetto, yes, but i painted it all black....doesnt look too bad, and IT DOES make a difference!!



99rtbig dog
Dodge Dakota
JOIN HERE


11/14/2002
15:56:27

RE: Home brew idea...
IP: Logged

Message:
word of advice pvc in the engine bay, bad idea! i forget where i heard it but it is a bad idea. something about gases it gives off when heated can catch fire!!!



98FlameRdDak
Dodge Dakota
JOIN HERE
 Email

11/14/2002
21:35:52

RE: Home brew idea...
IP: Logged

Message:
PVC heated generates mustard gas if I am not mistaken.

nitroussteve

Those intakes you are selling on Ebay are impressive. Can you bend that mandral pipe for a 3.9 by chance?

If so, please email me...The wife needs ideas for what to buy me for Christmas this year.

Mark




up yours
Dodge Dakota
JOIN HERE


11/14/2002
23:04:47

RE: Home brew idea...
IP: Logged

Message:
FUCCK YOU YOU MILKY LICKERS AS$ TICKLERS FAGGIT FAN CLUB!!!



Texas Todd
Dodge Dakota
JOIN HERE
 Email

11/15/2002
11:08:52

RE: Home brew idea...
IP: Logged

Message:
MIke,

I sent you an e-mail.

Pics are on home puter, I;m at work now. The smae basic theme as the others, just no glue, slightly larger diameter, larger radius 90 degree bend, and NO glue at all, very smooth bore thru-out.

Todd



afi360
*R/T*
 Email User Profile


11/15/2002
11:15:05

RE: Home brew idea...
IP: Logged

Message:
uuuum....so mustard gas is bad, right?

seriously, if someone from out of state would be willing to send me a 4' length of abs plastic tubing (3") i'd pay shipping and 10$ extra...its not 'code' in illinois.



DakSport
Dodge Dakota
JOIN HERE
 Email

11/16/2002
00:52:51

RE: Home brew idea...
IP: Logged

Message:
hey afi360. So your lookin for a 4 inch piece of abs 3 inch diameter. When i built mine i bought a really long piece so 4 inches would be nothin. Dont know how much it would be to ship. I live near Toronto. But if you would like me to help you out i would.

Ryan



dogliftsleg
Dodge Dakota
JOIN HERE


11/16/2002
12:07:49

RE: Home brew idea...
IP: Logged

Message:
and says mustard gas kills so yeah it is bad, and yes PVC emits it. and PVC will start to melt at 150 degrees and that is when it also starts to gas.Here is another fact mustard gas is also known as chlorine gas, and guess what chlorine produces 6 time as much free oxygen as it needs to burn in a fire so when it catches fire, it become a VERY HOT fast moving fire, just like what happens when an NO2 bottle goes off in one. So you die from the gas, then get burned to a small ash lump in 15 seconds. That is why the mfg. of air intakes uses other, safer plastics.



Brian C
Dodge Dakota
JOIN HERE


11/16/2002
21:58:04

RE: Home brew idea...
IP: Logged

Message:
I dont know about mustard gas ... but i KNOW it produces Polyvinyl Chloride gas. And as for melting at 150 degrees ... thats bull crap .... you need to get it at least 200 before it starts to go soft.........



99RT big dod
Dodge Dakota
JOIN HERE


11/16/2002
23:12:56

RE: Home brew idea...
IP: Logged

Message:
i told you it is a bad idea if used in engine bay. manufactures use black abs plastic instead, 100 dollar homemade intake, on 20000dollar truck do you want to risk it??? use black abs and you should be safe! if not shoot me in the foot.



pixelenvy
Dodge Dakota
JOIN HERE
 Email

11/17/2002
10:22:55

RE: Home brew idea...
IP: Logged

Message:
haha yeah guys for sure I'll use abs :o) ... I guess I should have responded but done worry abs it is.. skrew pvc

thanks,
-m



Texas Todd
Dodge Dakota
JOIN HERE


11/18/2002
11:47:03

RE: Home brew idea...
IP: Logged

Message:
I have about a 7" pvc from my 'Fernco' 90 degree elbow off my TB, to the stick air box, moded with K&N drop in.

After about a year in use, I had it off putting in my HO cams, looked the same as when I built it, inside and out.

Maybe the pvc right on the TB isn't a good idea, but over the right Valve cover, in place of the accordian tube, I've had no probs yet!



Texas Todd
Dodge Dakota
JOIN HERE


11/18/2002
19:16:49

RE: Home brew idea...
IP: Logged

Message:
pixelenvy, I sent you some pics,sorry, no link to them on the web.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.