| From | Message |
Greg
Dodge Dakota
JOIN HERE
10/30/2002
03:20:31
|
 Subject: Who's gears to use
IP: Logged
Message:
i've done some research and found some
contradicting opinions. so i figure i'll ask. i'm
looking to upgrade to the 3.90 gears with a dana
traclock in my 00 v6 5spd. my question is who's
gears do i buy? who makes the best gears? or
should i try to find a factory set? thanks
Greg
|
Fenris
Dodge Dakota
JOIN HERE
10/30/2002
06:01:14
|  RE: Who's gears to use
IP: Logged
Message:
The only gear site I've seen around is www.gearsareus.com
|
Lab Rat
GenIII
10/30/2002
09:59:02
| RE: Who's gears to use
IP: Logged
Message:
Check out Richmond Gear.
Gibson Dual Sport, AirForce One air intake, Jet II, Jet TBS, 180 stat, IAT, TPS, no viscous fan, Lakewood traction bars, "Wilson" antenna ball...when are we gonna see some real parts??!!
|
1Flamed92Dak
GenII
10/30/2002
10:13:16
| RE: Who's gears to use
IP: Logged
Message:
You may also want to give Randy's Ring and Pinion a call at 1-800-292-1031 he has some of the best prices around.
|
Greg
Dodge Dakota
JOIN HERE
10/30/2002
12:34:57
| RE: Who's gears to use
IP: Logged
Message:
right i know where to find everything. but i've
seen some swear by richmond gears and some say
they wouldn't use them to save their life. what i
am looking for is whos is a quaity gear
manufacture? who's gears will last? thanks for the
replies though
Greg
|
xplikt
GenIII
10/30/2002
12:38:15
| RE: Who's gears to use
IP: Logged
Message:
I've heard the most complaints about Richmond gear, but you can get them rom Summit if you want them. I am leaning towards Randy's myself. I nice set of 4.11 or 4.56 would be fun.
-Mike
http://www.dodgetruckworld.com/xplikt/
2002 2WD RC SLT 4.7L 5spd 3.92 LSD
MBRP Single in/out, straight piped 3rd cat, turndown tip
Hotchkis swaybars and springs
Bilstein custom tuned shocks
Roadmaster Active Suspension
Shaved emblems and antennae
|
Greg
Dodge Dakota
JOIN HERE
10/30/2002
14:24:20
| RE: Who's gears to use
IP: Logged
Message:
hey how you liking the 3.92s? i was in a debate on
which to get the 3.92 or the 4.11. i'm gonna stick
with the 3.92 till i do the engine upgrade and
rear axel and such. from what i've been reading,
Randy's is the way to go. so next paycheck i
should be able to pick them up.
Greg
|
xplikt
GenIII
10/30/2002
14:37:30
| RE: Who's gears to use
IP: Logged
Message:
My 3.92s are fine, but I just want a lil more oomph. The gears are still pretty new and RedLine oil is going in it soon, so they'll be in great shape to be sold when I'm ready to switch to the 4.56s.
-Mike
http://www.dodgetruckworld.com/xplikt/
2002 2WD RC SLT 4.7L 5spd 3.92 LSD
MBRP Single in/out, straight piped 3rd cat, turndown tip
Hotchkis swaybars and springs
Bilstein custom tuned shocks
Roadmaster Active Suspension
Shaved emblems and antennae
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
