| From | Message |
Big G
GenIII
 
4/25/2001
13:36:23
|
 Subject: HELP! 01 V-6 No Listings
IP: Logged
Message:
Once again I come to ask for help. I went to my local Pep Boys to get a Borg Warner brass cap & rotor, good thing I brought the part numbers I got here because they had no listing. Then I ask for an Accel Super Coil and guess what.. NO LISTING! (The story of my life with this truck) Anyone know the part number for the coil? Once again, I THANK YOU!
: )
2001, 3.9, 2WD Auto, Loaded SLT Club Cab, Sport Suspension
|
Harvey
Unregistered
4/26/2001
09:29:16
| RE: HELP! 01 V-6 No Listings
IP: Logged
Message:
Big G,
I checked with the part numbers from Chuck's intense 99 dak website and he listed:
Accel Super coil..........140021
Accel harness adapter for '98 & newer.......140021AH
This was for a '99. I'm hoping this would fit a '01. I can't see why not. The harness adapter is for a grey connector, I think. Perhaps someone who has installed the Accel Suer coil on a '00/'01 already can give their opinion. I'll probably make this mod in couple of months. Good luck.
'01 QC, sport, v6 3.9L, 5sp, 4x2, K&N drop in
|
big G
GenIII
4/26/2001
10:35:39
| RE: HELP! 01 V-6 No Listings
IP: Logged
Message:
Thanks but the part number 1490021 is for wires..
: )
2001, 3.9, 2WD, Auto, Loaded, SLT Plus, Club Cab, Sport Suspension
|
Harvey
Unregistered
4/26/2001
13:10:53
| RE: HELP! 01 V-6 No Listings
IP: Logged
Message:
140021 not 1490021
Accel Super coil..........140021
Accel harness adapter for '98 & newer.......140021AH
I checked www.truckperformance.com for ignition coils for a 2000 dakota.
'01 QC, sport, v6 3.9L, 5sp, 4x2, K&N drop in
|
Harvey
Unregistered
4/27/2001
08:59:02
| RE: HELP! 01 V-6 No Listings
IP: Logged
Message:
Sorry Big G, the site I checked was Jeg's High Performance and not truckperformance.
'01 QC, sport, v6 3.9L, 5sp, 4x2, K&N drop in
|
Brian Thompson
Dodge Dakota
JOIN HERE
3/24/2003
09:19:36
| help locating adaptor harness
IP: Logged
Message:
I need help locating adaptor harness part#140021ah
for 98 newer Dodge Ram for the Accel super coil. I have checked with several places and no one has them in stock and apparently the manufacture is slow in making them or whatever. Has anyone recently located anyplace that has them in stock.
|
?
Dodge Dakota
JOIN HERE
3/24/2003
10:09:56
| RE: HELP! 01 V-6 No Listings
IP: Logged
Message:
Big G,
You're doing all that to an 01?
Wishing you'd got the 4.7? Better MPG, Power, and no need to put ANY of that on the 4.7 to boot!
|
?
Dodge Dakota
JOIN HERE
3/24/2003
10:27:20
| RE: HELP! 01 V-6 No Listings
IP: Logged
Message:
Take it to the v6 forum!!!
|
Deep Purple
Gen III
3/24/2003
20:56:10
| RE: HELP! 01 V-6 No Listings
IP: Logged
Message:
Try Summit, they may have the adaptor.
|
Tim Holcomb
Dodge Dakota
JOIN HERE
10/02/2003
13:13:00
| 1996 3.9 V-6 in a Dodge Van
IP: Logged
Message:
I wish to install dual exhaust and, if possible headers to my 1996 Dodge van, it has a 3.9 V-6. The exhaust/smog control system incorporates an oxygen sensor before and after the catalytic converter. I live in California and according to the muffler shop should I install any type of dual exhaust system the computer will mis-read the signals from the O2 sensors thereby causing the vehicle to either run poorly or fail the smog test which must be done here every 2 years.
I know the vehicle will run better with duals. Any products available and/or ideas as to working around the double oxy sensor issue??
Tim
|
latexsolarbeef
Dodge Dakota
JOIN HERE
11/20/2003
18:50:39
| RE: HELP! 01 V-6 No Listings
IP: Logged
Message:
you could use a cat box and run 2 mufflers and high flow cats-one for each pipe.the cat box would take care of the computer and the cats will give better emissions than the single stock one
|
Tim
Dodge Dakota
JOIN HERE
11/20/2003
19:13:44
| RE: HELP! 01 V-6 No Listings
IP: Logged
Message:
Thank you....the 2 shops I've spoken seem very gun shy about this issue. Meanwhile, my converter has started rattling like a son of a gun.
The damn thing has 180K plus miles and keeps plucking away but that just makes it a true gutless wonder.
TH
Best
|
latexsolarbeef
Dodge Dakota
JOIN HERE
11/26/2003
17:50:37
| RE: HELP! 01 V-6 No Listings
IP: Logged
Message:
go to krcperformance.com Marty Fletcher can sell you a cat box.This will "lie" to your computer and tell it everthing is o.k with your single cat and 02 sensors(cat box acts as the single cat as if it were new and operating eficciently) while allowing your true duals to work their magic.Prob'ly a couple hundred or so for the box,but I'm sure your 3.9 is the same as any chrysler 3.9.The block and heads have remained virtually unchanged since 90 or 91.Most parts like rockers ,t/bs,injectors,pistons,rods,etc. that fit 318's also fit the 3.9.It's weird,though,that alot of aftermarket companies stop their application listings around 96-97.Up to 2001 or 02 when the 3.7 took over,all this stuff fits with some kind of adapter or most times without any kind of adaptation at all.I attribute this to the laziness of the R&D teams for these companies AND the fact that only freaks like us wish to tweak up a v6.AS for the mechanics that stone wall you when you ask them about this...they are told ;by whomever it is that 'tells mechanics stuff',that it is a violation of federal law to remove any catalytic coverter that is working,so naturally they will get pretty creative(or dumbfounded) when you back them against that "wall" ...food for thought.If a doctor had a cure for cancer,would it be in his best interest to give it away?Or do you think he'd hide it so he can keep on making money off of you?I dunno maybe I'm just paranoid?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
