Forums
Forum Tools
|
 |
06:26:04 - 04/25/2024
Dakota Performance
| From | Message |
johnc
GenIII
 
10/14/2002
11:44:43
|
 Subject: 4.7 HO cam install
IP: Logged
Message:
I been searrrrrrchin!!!
but can't find the answer to this ridiculous question.
Gonna install the HO cams this weekend but which cam is left(driver) and which one is right(passenger)!!!!!!!
53021411 AB and 53021412 AB
Really don't want to screw this up!!
Helllllllp.
jc
'00',cc,4.7,4X4,auto,3.92sg,Flowmaster,Quickd Intake,F&B 70mm tb,tstat,BFG's,and a Bernd box, HO manifold OTW
|
Texas Todd
Dodge Dakota
JOIN HERE
10/14/2002
11:52:55
|  RE: 4.7 HO cam install
IP: Logged
Message:
My HO cams are still in the packing. Plan on doing it soon, winter job.
But when you disassemble for the install, it should be obvious. One is longer than the other.
|
Chipster
Dodge Dakota
JOIN HERE
10/14/2002
12:05:54
|  RE: 4.7 HO cam install
IP: Logged
Message:
johnc, Open the packaging and look at the
cams. One will be longer than the other. The
one for the passenger side is longer, because
it has a cam sensor target on it.
|
johnc
GenIII
10/14/2002
12:18:32
| RE: 4.7 HO cam install
IP: Logged
Message:
Todd, Chipster, thanks for the replies.
Yea, I figured I'd be able to spot the difference once we're in there even if it means matching up the lobes. Just wanted a little 'insurance' to be safe.
Looking forward to the install. BTW, anybody have the rocker arms fall off like the FSM says beware of???
Tx,
jc
'00',cc,4.7,4X4,auto,3.92sg,Flowmaster,Quickd Intake,F&B 70mm tb,tstat,BFG's,and a Bernd box, HO manifold OTW
|
yates-in-DE
GenIII
10/14/2002
14:10:15
|  RE: 4.7 HO cam install
IP: Logged
Message:
Had the intake and exhaust fall off on the driver side back and they sat right back down no problem.
The cam on the passenger side is longer than the one on the driver side. About an inch or so.
Later,
MyVW Killer
Lynn
|
Chris
Dodge Dakota
JOIN HERE
10/15/2002
08:08:53
| RE: 4.7 HO cam install
IP: Logged
Message:
I had one rocker fall off on my second cam... talk about second guessing the first one... But I started it up after and it was fine... Good luck with the install... it is not hard if you pay attention to the details...
Chris
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
