Forums
Forum Tools
|
 |
17:32:39 - 04/19/2024
Dakota Performance
| From | Message |
Troy
Dodge Dakota
JOIN HERE
10/10/2002
17:01:16
|
 Subject: CW, Bernd, ????
IP: Logged
Message:
I have my truck in the shop and the service manager told me that they are replacing the transmission. Is this a complete unit (only add fluid) or will they use parts from my old unit? Does the new (or factory rebuilt??) tranny come with new valve body, sensors, etc. or will the old be used? They said the pump was welded to the torque converter. Thanks in advance.
2000 QC 4x4 5.9L (46RE)
|
Clevite 77
GenIII
10/10/2002
19:21:21
|  RE: CW, Bernd, ????
IP: Logged
Message:
I know I'm not Bernd, or CW, but usually the dealerships, will send it back to Chrysler so they can inspect it to see what went wrong, so they can keep it from happening again, and you'll get a new one in the meantime.
But... I could be wrong
Line-X Over The Rail Bed Liner
Home Brew Intake
Dual Exhaust
3923 Autolite Plugs
Krypton 4300K Blue/Whites
Euro Clear Corners
Grille-Tech Grill Insert (Silver)
TPS Set At .705
Removed Rubber Flap
I've used Mobil -1 Full Synthetic Oil And Filter Since I Had 6,000 miles
|
CW
GenIII
10/10/2002
19:46:04
|  RE: CW, Bernd, ????
IP: Logged
Message:
Probably got a rebuilt because the damage was bad enouph to warrant it. Just install and add fuild everything is new.
4.7 HO, CW style
2001 4.7 5sp 3.92 LSD
Ported 68mm TB, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" Z-tube, Roadmaster active suspention, Removed Third cat, Electric fan Convertion, HO cams, Robert shaw 180 therm, HO intake manifold.
|
Troy
Dodge Dakota
JOIN HERE
10/10/2002
22:23:21
| RE: CW, Bernd, ????
IP: Logged
Message:
Thanks CW!! You've been a great help in this. Thanks again.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
