| From | Message |
onekoolkota
Dodge Dakota
JOIN HERE
10/06/2002
20:12:25
|
 Subject: Mods for S/C
IP: Logged
Message:
What modifications will I HAVE to make if I install a supercharger on my 3.9'r?
|
j
GenIII
10/07/2002
10:43:18
| RE: Mods for S/C
IP: Logged
Message:
Depends on how much boost you want to run. I'm not sure about the 3.9, but the 4.7 can handle about 6lbs stock. If you want to go higher, you should consider heavy duty head gaskets and studs.
2000 4.7 CC auto, clear corners, Magnaflow catback, Kenne Bell s/c.
|
IntenseDak39
*GenIII*
10/07/2002
11:12:03
| RE: Mods for S/C
IP: Logged
Message:
it can handle 9 pounds without a gasket change. You would have to cut out or push in your passenger side fender well just a little because the supercharger will rub against it... it sits closer to the firewall on the V6 than the V8... damn those extra cylinders!!!!
--"did you mean the charger, because that's got a hemi, too!"
98 Dakota Sport V6: 8.95@77.9 mph (1/8th)
99 Oldsmobile Alero GL3 V6: xx@xx mph
|
Demon Dakota
DakotaEnthusiast
10/07/2002
17:20:38
| RE: Mods for S/C
IP: Logged
Message:
Actually, the 4.7L could easily support up to 10 PSi without any drastic changes whatsoever.
|
bernd
*GenIII*
10/08/2002
16:27:05
| RE: Mods for S/C
IP: Logged
Message:
I was running 10# on my V6 along with a 40HP shot (dry shot) of Nitrous. This was on FACTORY head gaskets. (My stupidity killed the block but the heads were fine - too much nitrous for too long of a time frame...but I still kicked the other cars a$$.) ;)
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
