| From | Message |
Selcher
Dodge Dakota
JOIN HERE
10/02/2002
12:02:55
|
 Subject: Got H.O. Cams Today
IP: Logged
Message:
Well I got my H.O. Cams today. I will be installing them likely on the weekend if the weather permits. I read on here before how a guy with a 4x4 installed the cams and then had some issues with his 4 wheel drive engaging. I don't know the person's name but if he reads this, could you post and let me know if you ever figured out the problem and what it was? Also, any other little heads-up I should be aware of? I printed off the install guide from speedtweaks.com and it's pretty detailed so the install should go fine. Now, just to find a wedge tool. Also, I will be putting synthetic oil in with the new cams. Thoughts? Suggestions? Flames? har har
Regards,
Aaron
'02 CC 4.7L 4x4
|
Clevite 77
GenIII
10/02/2002
13:07:20
| RE: Got H.O. Cams Today
IP: Logged
Message:
Let me know how it goes, it sounds like we have the same truck
"If my calculations are correct, when this baby hits 88 miles per hour, you're gonna see some serious shit."
|
2THEXTRM
GenIII
10/02/2002
13:22:05
| RE: Got H.O. Cams Today
IP: Logged
Message:
I got my HO cams and intake last week and haven't had a chance to install them yet. I am interested in the issue with install on a 4x4 though before I start. I didn't see the thread this was mentioned but would like to know nonetheless since mine is 4x4. I also printed the instructions off from Speedtweaks and took down some notes from the different threads that have been posted on the install process.
Flowmaster cat back, Air Raid w/homemade TB connect, Poweraid TB Spacer, Splitfire Plugs
3 inch body and 1.5 Block Lift, 305 70-16 X-Terrains on AR Terons
|
Selcher
Dodge Dakota
JOIN HERE
10/02/2002
13:22:51
| RE: Got H.O. Cams Today
IP: Logged
Message:
Clevite 77,
Did I mention my truck was Silver Metallic too? hahaha... Yup, same truck... Sport Plus? All the trimmings? I have the hard tonneau cover painted to match too...
Regards,
Aaron
'02 CC 4.7L 4x4
|
Clevite 77
GenIII
10/02/2002
13:29:12
| RE: Got H.O. Cams Today
IP: Logged
Message:
hahaha no sh!t, get some pics.
2THEXTRM has an 01 but the same thing too, but I guess we all have dakotas and the odds aren't that high
here's my site, it really needs updating though, hey 2THEXTRM, you need to update your site too hahaha
all_about_power.tripod.com
"If my calculations are correct, when this baby hits 88 miles per hour, you're gonna see some serious shit."
|
Livinonline
Dodge Dakota
JOIN HERE
10/02/2002
14:02:49
| RE: Got H.O. Cams Today
IP: Logged
Message:
I have installed the HO cams and I have a 2001 CC 4x4 4.7L,
I have no problems engaging 4 wheel drive at all. Not sure why the cams would effect this.
|
Selcher
Dodge Dakota
JOIN HERE
10/02/2002
14:14:34
| RE: Got H.O. Cams Today
IP: Logged
Message:
I couldn't see how they would affect this either but the person who posted said that he couldn't get into 4 wheel drive after installing the cams. Thanks for the reply, no worries now that I know they're in another 4x4...
Regards,
Aaron
'02 CC 4.7L 4x4
|
CW
GenIII
10/02/2002
14:31:57
|  RE: Got H.O. Cams Today
IP: Logged
Message:
I have done both 4x4 and 2wd trucks the install is the same. There is nothing you can do to not make it go into 4x4 by doing the cams. Unless you take the transfer case linkage off. LOL
4.7 HO, CW style
2001 4.7 5sp 3.92 LSD
Ported 68mm TB, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" Z-tube, Roadmaster active suspention, Removed Third cat, Electric fan Convertion, HO cams, Robert shaw 180 therm, HO intake manifold.
|
2THEXTRM
GenIII
10/02/2002
15:21:48
| RE: Got H.O. Cams Today
IP: Logged
Message:
Cool, I didn't think 4x4 should be affected, install will continue as planned on Sunday pending hangover from my cousin's bachelor party this saturday night:) I'll be sure not to disconnect the plug that goes to electronic 4x4 selector switch CW, lol.
Metallic Silver Dak's rock, just look at SinCity R/T for a fine example of a silver 2wd Dak:) The other colors are nice too, I also like white and even black is awesome if it is someone elses Dak so I don't have to keep up the finish, lol.
Clevite, you are right, my webpage is almost 6 months out of date and alot has changed on my truck since then, lol. Mmmm.... now where did the time go that I set aside for that project? I'll have to go looking for it.
Flowmaster cat back, Air Raid w/homemade TB connect, Poweraid TB Spacer, Splitfire Plugs
3 inch body and 1.5 Block Lift, 305 70-16 X-Terrains on AR Terons
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
