| From | Message |
Livinonline
Dodge Dakota
JOIN HERE
9/20/2002
00:46:30
|
 Subject: HO Cams Specs?
IP: Logged
Message:
Does anyone have the specs (lift,duration etc.)
For the HO cams that are going in the 4.7L?
Thanks,
|
Andrew
Dodge Dakota
JOIN HERE
9/20/2002
02:49:37
|  RE: HO Cams Specs?
IP: Logged
Message:
HO Intake 243° .472"
HO Exhaust 254° .429"
Reg. Intake 240° .440"
Reg. Exhaust 254° .429"
116 lobe separation 17 degrees overlap,
Mine are in the box ready to go in very soon!!!!!
|
SLF Dak
Dodge Dakota
JOIN HERE
9/20/2002
07:02:09
| RE: HO Cams Specs?
IP: Logged
Message:
Intake duration 200/480
Exhaust duration 212/ 436
Lobe Separation 111 degrees
That is at .050 lift, the FSM is way wrong.
|
yates-in-DE
GenIII
9/20/2002
08:10:45
| RE: HO Cams Specs?
IP: Logged
Message:
Check here I think you will find all the MAN PAGES you will need to decide for yourself.
This is the Jeep Engine Page Specification Page with the Lift and duration Specs
Good Luck,
MyVW Killer
Lynn
|
CW
GenIII
9/20/2002
09:13:36
|  RE: HO Cams Specs?
IP: Logged
Message:
I have talked with marty at KRC and he assures me that the specs in the manual are not right. He used a $10,000 cam machine to get the specs. I won't trust the manual either as there are so many revisions it isn't even funny. Use the specs off of KRCperformance.com
2001 4.7 5sp 3.92 LSD
Ported 68mm TB, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" Z-tube, Roadmaster active suspention, Removed Third cat, Electric fan Convertion, HO cams, Robert shaw 180 therm, HO intake manifold.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
