| From | Message |
Chad
Dodge Dakota
JOIN HERE
9/19/2002
16:24:08
|
 Subject: F&B TB for sale
IP: Logged
Message:
I have an original Stage 1 F&B TB for sale. This unit was the
predecessor to the famed billet TB that is so popular now. It
essentialy is a stock TB that has been fitted with thinner throttle
blades (blue anodized) and throttle shaft with smaller head screws,
the top has been milled flat which removes the restrictive air horns,
but leaves 4 tabs to make sure the stock air hat fits, and a 7 degree
taper has been machined above the throttle plates to the top of the
TB, and the edges radiused smooth. Very nice unit. COmes with all
sensors.
What I would need in return is your stock TB with sensors attached.
This is a must because my friends Dakota is sitting TB-
less and I need yours to put back on his truck. I bought this TB new
from Bruce at F&B for my 2000 R/T and used it until I sold the truck,
with Mikes stock TB on it and he used my TB until now. This TB will
fit 98-02 5.2 and 5.9 liter engines.
I'm asking $150 US shipped to you, and you send me yours back. If you want to keep yours, I have to charge you a $100 core charge so I can buy another stocker.
It's really not a bad deal considering what a new one costs. It flows 745 cfm compared to 636 cfm of a stock TB at 25" H20, and only 55 cfm less than a billet 50mm TB. These are F&B's own numbers.
Thanks,
Chad
|
chad
Dodge Dakota
JOIN HERE
9/20/2002
00:15:37
|  RE: F&B TB for sale
IP: Logged
Message:
what size is the TB? If it will fit on my 99 5.2 i will be interested. thanks
-chad-
|
Splinter
Dodge Dakota
JOIN HERE
9/20/2002
00:24:49
| RE: F&B TB for sale
IP: Logged
Message:
"This TB will
fit 98-02 5.2 and 5.9 liter engines."
|
Chad
Dodge Dakota
JOIN HERE
9/20/2002
15:00:43
|  RE: F&B TB for sale
IP: Logged
Message:
This is really pissing me off. I replied to this post and another this morning and they are disappearing
Anyways, I saw .4 seconds gain with the TB on my stock 2000 R/T. 15.4 to 15.0 with the same weather conditions!
|
kota on 20s
GenIII
9/20/2002
19:07:15
| RE: F&B TB for sale
IP: Logged
Message:
what size is it? i might be interested
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ciramic JBA headers, carsound cat, dumped gibson
|
Chad
Dodge Dakota
JOIN HERE
9/20/2002
19:56:40
| RE: F&B TB for sale
IP: Logged
Message:
It uses the stock bore, but is tapered 7 degrees above it.
|
Chad
Dodge Dakota
JOIN HERE
9/23/2002
15:32:41
| RE: F&B TB for sale
IP: Logged
Message:
Still for sale.
|
RTjohn
Dodge Dakota
JOIN HERE
9/24/2002
12:39:45
| RE: F&B TB for sale
IP: Logged
Message:
Chad can you email a pic of thre TB?
RTjohn
|
Chad
Dodge Dakota
JOIN HERE
9/24/2002
14:23:26
| RE: F&B TB for sale
IP: Logged
Message:
Hi John. I'll get one for you ASAP.
Thanks,
Chad
|
Chad
Dodge Dakota
JOIN HERE
9/25/2002
02:03:01
|  RE: F&B TB for sale
IP: Logged
Message:
John, your hotmail is too full for me to send you anything but I have pics now!
Chad
|
Chad
Dodge Dakota
JOIN HERE
9/30/2002
01:20:23
| RE: F&B TB for sale
IP: Logged
Message:
Anybody still interested?
Chad
|
born2steel21
GenIII
9/30/2002
08:44:46
| RE: F&B TB for sale
IP: Logged
Message:
is it 48 MM or 50 MM?
-- Death Before Dismount --
|
Chad
Dodge Dakota
JOIN HERE
10/11/2002
11:55:12
| RE: F&B TB for sale
IP: Logged
Message:
Okay folks, it's still for sale. Had a potential deal but unfortunately, it didn't pan out. I've lowered my price to $125 US, if you send me your core. I will overnight it to you as well if you need it in a hurry. If you want to just buy it outright, the price is $200 US. It uses the stock 48mm bore and is CNC-machined to taper to a flare above the stock bore witha nice radiused edge.
This is a great deal people. You won't be disappointed. For prompt answers to questions, please email me. The notification function doesnt seem too quick.
Thanks,
Chad
|
erik
Dodge Dakota
JOIN HERE
10/11/2002
20:15:02
| RE: F&B TB for sale
IP: Logged
Message:
if it will fit my 1993 5.2L im interested.
erik
|
Chad
Dodge Dakota
JOIN HERE
10/14/2002
03:28:37
| RE: F&B TB for sale
IP: Logged
Message:
>Hi Erik. I have been told that it will fit but you have to modify it
>a little bit. The throttle linkage bell crank is different on the
>93-95 TBs and has to be transferred to the F&B to make it work
>properly. I know a couple of guys who have done it.
>
>Thanks,
>
>Chad
PS Did you send me an email to my hotmail account? It says its from Mitchell somebody?
|
LiveDakota
GenIII
10/14/2002
19:22:36
| RE: F&B TB for sale
IP: Logged
Message:
Im assuming this will also fit a 00' 3.9L? If so send some pics my way and ill see if i cant take it off your hands for ya.
Thomas C.
HUH? WHAT? I CANT HEAR YOU!
|
Chad
Dodge Dakota
JOIN HERE
10/16/2002
13:39:26
| RE: F&B TB for sale
IP: Logged
Message:
Hi Thomas. Yep, it would work nicely on your 3.9. Only thing though is I couldnt take your core because I need a V8 one so the price would have to be the $200.
Thanks,
Chad
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
