Forums
Forum Tools
|
 |
11:10:22 - 04/26/2024
Dakota Performance
| From | Message |
David Snyder
Dodge Dakota
JOIN HERE
9/10/2002
12:36:31
|
 Subject: 4X4 10.16 in 1/8th
IP: Logged
Message:
I'm wandering why all your 2WD are running so slow in the 1/8th. I run a 10.16 with 3.55 gears, new intake, throttle body spacer, dual exhaust, JBA headers, and weighing in at 4480 lbs!
So what is the problem. I just did a few more things, but I won't get to the track until 9/11.
I'll let you know how I do.
|
99intense4x4
Dodge Dakota
JOIN HERE
9/10/2002
14:57:31
|  RE: 4X4 10.16 in 1/8th
IP: Logged
Message:
I've had no problems either. This is my best 1/4 mile run ever.
60ft: 2.335
330ft: 6.415
mid MPH: 70.31
660ft: 9.874
990ft: 12.743
1/4 mile: 15.34@88.01mph!!
This is in a '99 Club Cab 4x4, 5.2L, 5-speed, 3.55LSD. Mods: K&N FIPK, Spintech exhaust, Hurst shifter, 180 thermostat. I was only able to break 15.30's once though...the rest of runs were in the 15.60-15.70 range.
|
alex
Dodge Dakota
JOIN HERE
9/10/2002
15:14:38
| RE: 4X4 10.16 in 1/8th
IP: Logged
Message:
My 2wd runs 9.34 in the 1/8th....
http://www.dragtruk.com/ENTRIES/0F64H9L1P5IL.html
|
IntenseDak39
*GenIII*
9/10/2002
15:37:24
| RE: 4X4 10.16 in 1/8th
IP: Logged
Message:
my v6 ran a 9.5 with a 75 shot of nitrous and a 8.95 with a 100 shot. yeah yeah you say well you were sprayin... but i was also starting at 175 hp and 225 lb of torque. not 235/250 hp and 345 lb of torque.
edelbrock intake, modified manifold, headers, flowmaster, 24lb injectors, mp throttle body, 1.7 rr, msd 6a, msd wires, blaster 3, b&m shifter, shift kit, coilovers, drag shocks, ladderbars, panhard bar, 150# coils, electric fan, oil cooler, 180 thermostat, autolite 3923, corbeau seats, slicks, mojo
|
alex
Dodge Dakota
JOIN HERE
9/10/2002
16:21:55
|  RE: 4X4 10.16 in 1/8th
IP: Logged
Message:
You might have started out with 175 hp, but what you'll eventually end up with is little chunks of piston in the exhaust pipe.......
;~)
Plus I don't have to refill a bottle to go 9.34's....
;~) again.....
|
IntenseDak39
*GenIII*
9/10/2002
18:22:23
| RE: 4X4 10.16 in 1/8th
IP: Logged
Message:
LOL! yep! but not with the 100 shot though. when i had my truck dynoed the a/f reading was perfect and i have checked my compression and its still good. BUT.... if i get nitrous again i swear i am gonna throw in the 150 shot pills to see what happens
:::mushroom cloud over DFW:::
yep... and then i can buy a V8 and do it all over again! woo hoo!!!!!
edelbrock intake, modified manifold, headers, flowmaster, 24lb injectors, mp throttle body, 1.7 rr, msd 6a, msd wires, blaster 3, b&m shifter, shift kit, coilovers, drag shocks, ladderbars, panhard bar, 150# coils, electric fan, oil cooler, 180 thermostat, autolite 3923, corbeau seats, slicks, mojo
|
SuperBee
Dodge Dakota
JOIN HERE
9/10/2002
22:30:07
| RE: 4X4 10.16 in 1/8th
IP: Logged
Message:
you know i see something you could get rid of to drop weight
"throttle body spacer"
means "what performance it does give you it balanced by the extra weight it adds to the truck"
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
