Forums
Forum Tools
|
 |
06:48:51 - 04/24/2024
Dakota Performance
| From | Message |
DBDak
Dodge Dakota
JOIN HERE
7/25/2002
18:58:01
|
 Subject: CW, got a ?? for ya
IP: Logged
Message:
In the next few weeks I will be ordering the
HO cams and HO intake. I was wondering since I'll
be in there, how difficult will it be to go ahead
and pull the heads off. So I can have them shaved
a valve cut and a little porting and polishing.
And also will having that little bit of work on
the heads help out with the install of the HO parts. Also will I need my computer flashed. Right
now I have that performance enhancer from the
OBDII for spark Knock and also a JET II. THANKS
DBDak
01 CC 4x4 4.7 5spd 3.92ASD
4"homebrew w/9"K&N, 3rd cat off dual outlett muff,
3923's, 180t-stat, JETII, port&polished 68mm TB,
TPS@.72V
|
D
Dodge Dakota
JOIN HERE
7/25/2002
19:20:27
|  RE: CW, got a ?? for ya
IP: Logged
Message:
how much are HO heads? I couldnt find a PN
for them anywhere.
|
CW
GenIII
7/25/2002
19:38:20
|  RE: CW, got a ?? for ya
IP: Logged
Message:
The heads are a fair amount more work to get off. You can't shave very much off of these heads from what I know. Not enouph to make it worth while anyways. Won't need the valves ground either. The intake valves are alredy back cut on them.
The porting may be worth it though. Duner ported his and had good results. I would love to do mine but I have no place to do it.
D: I am not sure what the price on them is.
2001 4.7HO RC 5sp 3.92 LSD
Click on thumbnail for mods
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
