| From | Message |
Dakotafreak
Dodge Dakota
JOIN HERE
7/10/2002
16:11:14
|
 Subject: CUSTOM INTAKE 92 dak
IP: Logged
Message:
hey guys i want to make a custom intake for my 92 dakota. its a LE with a 5.2. all i have right now is that k&n intake that sits right on top of the intake manafold. I want one that i can direct down towards the cooler air. Please help!
|
DaveR
Dodge Dakota
JOIN HERE
7/10/2002
17:40:30
| RE: CUSTOM INTAKE 92 dak
IP: Logged
Message:
www.ramairbox.com
I got one of their setups for my 94' 318 and i really like it. It does make for some interesting plumbing though. You don't realize how small your engine bay is till you try and find a home for two 4" pipes. I have a pic of it installed too if your interested.
|
Dakotafreak
Dodge Dakota
JOIN HERE
7/10/2002
21:49:04
| RE: CUSTOM INTAKE 92 dak
IP: Logged
Message:
Yeah please, and tell me what type of materials you used! that would be greatly appreciated
|
DaveR
Dodge Dakota
JOIN HERE
7/10/2002
22:38:42
| RE: CUSTOM INTAKE 92 dak
IP: Logged
Message:
http://www.geocities.com/klipsch318/ramair.html
That is the pic i have at the moment. Some tubing has been moved around a bit, but you get the jist from the pic. The ram air kits are basicly one size fits all with a little work. You have to do a slight bit of work to make it fit under the hood, but nothing to major. I also did some cuts with some refiber glassing so it would clear the radiator hose.I then found someone to paint it for $50 and it came out very well for a cheap paint job. Hope this helps. I'll get some more pics when it's light out.
|
arzadon
Dodge Dakota
JOIN HERE
7/11/2002
12:24:54
|  RE: CUSTOM INTAKE 92 dak
IP: Logged
Message:
I have a 92 Dakota and I made a custom air intake. What I did is bought an air hat from a 97 and above Dakota and also the accordian style hose attached to the air hat from a salvage yard. I then bought a 45 degree 3" pipe to fit the hose. Check to see what length you need. Then a bought a an air filter with 3" cone type filter to fit the 3" pipe. I hade to make an L bracket to mount the pipe to the fender. It works pretty good. I painted the pipe to give it a custom look. Hope this helps
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
