| From | Message |
Art
Dodge Dakota
JOIN HERE
7/01/2002
13:03:36
|
 Subject: Denso plugs
IP: Logged
Message:
Anyone tried these Denso iridium plugs?
http://www.densoiridium.com/default.asp?flash=1
they recommend the ik16 for the 4.7,the ik20 is a heat range colder and is recommended by kenne bell also.
What ya think worth a hundred bucks???
|
Demon Dakota
DakotaEnthusiast
 
7/01/2002
16:13:36
| RE: Denso plugs
IP: Logged
Message:
Are you nucking futs? Use Autolite 3923's...
|
Art
Dodge Dakota
JOIN HERE
7/01/2002
19:39:17
| RE: Denso plugs
IP: Logged
Message:
Ya Im nuckin futs and I used 3923`s and they did nothing good or nothing bad,just wondering if anyone has tried them
|
GlenC
GenIII
7/01/2002
22:05:14
| RE: Denso plugs
IP: Logged
Message:
I've been meaning to try these, but the price is a little hard to swollow. KB seems to swear by them tho. I'll probably swap for these when i do my next big engine upgrade. Probably do the plugs, cams, heads, and TB all in one big bang (well, i hope it doesnt go bang). But thats not for a while down the line. Im waiting for a little more aggressive cams and some heads that show a fair amount of improvement.
GlenC
'01, CC, SLT, 4.7, Auto, 3.55 LS
MBRP stainless dual rear exit catback.
Robert Shaw 180 T-Stat. Autolite 3923s
JBA Headers.
Kenne Bell supercharged.
Roadmaster active suspension.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
