| From | Message |
Anthony G
Dodge Dakota
JOIN HERE
6/27/2002
12:17:21
|
 Subject: M1 Intake Turtle
IP: Logged
Message:
Does any one know of a turtle setup for the M1 MPI intakes? I think it looks like a turtle shell that is put in the middle of the intake to help low end. Would that be for the 4bbl only or can that be had with the 2bbl?
|
Lew360
Dodge Dakota
JOIN HERE
6/27/2002
13:49:11
|  RE: M1 Intake Turtle
IP: Logged
Message:
Randy Pile at www.worldwideperformanceparts.com has the 4bbl w/turtle. There is a guy from Nova Scotia on www.dodgetrucks.org (I think his internet name is Salaryguy) that makes 2bbl m-1s w/turtles. Hope that helps.
'99 RC R/T,Gibson Headers and Cat-back, MSD 6a BTM, IAT adjuster, Powerdyne Supercharger. M-1 4/2 on the way.
|
R/Truck
Dodge Dakota
JOIN HERE
6/27/2002
13:55:50
| RE: M1 Intake Turtle
IP: Logged
Message:
It actually looks like a pyramid. I have one on my truck, cost $46 and produces 5-7hp I think.
Jeff Arnold sells them flameredrt@hotmail.com
|
Wesley
Dodge Dakota
JOIN HERE
6/27/2002
13:56:58
| RE: M1 Intake Turtle
IP: Logged
Message:
There is a guy who makes a 2bbl version on the RTML. His name is Jeff Arnold and he makes all kind of billet stuff for R/T's. So far he has made battery straps with the R/T logo, door sills, and the turtles. He has a large version for relatively stock engines and a smaller version for modded engines. I have the smaller one and it seems to work great. It got rid of the stumble off idle with the 2bbl M1. email him at
flameredrt@hotmail.com
Wesley
'01 Silver CC R/T
|
R/Truck
Dodge Dakota
JOIN HERE
6/27/2002
16:26:04
| RE: M1 Intake Turtle
IP: Logged
Message:
Is there an echo in here?
|
Wesley
Dodge Dakota
JOIN HERE
6/27/2002
16:29:07
| RE: M1 Intake Turtle
IP: Logged
Message:
No need to be a smart ass! Look at the time the messages were posted. As you were pressing enter, I was finishing mine and pressing enter.
Wesley
'01 Silver CC R/T
|
R/Truck
Dodge Dakota
JOIN HERE
6/27/2002
17:12:51
| RE: M1 Intake Turtle
IP: Logged
Message:
I was just messin with ya!
|
tman
Dodge Dakota
JOIN HERE
6/27/2002
17:55:34
| RE: M1 Intake Turtle
IP: Logged
Message:
HEY! I live 1 mile from Jeff Arnold and have seen his stuff, it looks really cool, like all the billet battery straps and middle rear light. trust me! his truck is soooo f*cking badas*s!!! he took me for a ride while highly intoxicated, and had the ride of a lifrtime in his truck, its sounds awesome. the doughnuts were fun too:-)
|
Troy
Dodge Dakota
JOIN HERE
6/28/2002
08:56:23
| RE: M1 Intake Turtle
IP: Logged
Message:
Anyone have a picture of this, or know where I can see one?
|
Anthony G
Dodge Dakota
JOIN HERE
6/28/2002
11:23:24
| RE: M1 Intake Turtle
IP: Logged
Message:
WOw, thanks for the replys! I might be buying one soon. That's if I find some more money for my truck, after upgrading my Computer and purchasing Never Winter Nights I'm addicted to this game.
http://nwn.bioware.com/
|
R/Truck
Dodge Dakota
JOIN HERE
6/28/2002
13:15:42
| RE: M1 Intake Turtle
IP: Logged
Message:
Troy
It looks like a pyramid shaped fishing weight about 1.5" tall and wide. It comes with a threaded pipe plug and long skinney bolt to fasten it down. For $46 you can't go wrong. He has two different sizes, one for low end torque and one for high end hp. Email him for pictures.
|
MikeD
*R/T*
7/02/2002
14:11:28
| RE: M1 Intake Turtle
IP: Logged
Message:
What's his email address?
~Mike~
Get In...Sit Down...Shutup...& Hangon
|
R/Truck
Dodge Dakota
JOIN HERE
7/02/2002
14:31:04
| RE: M1 Intake Turtle
IP: Logged
Message:
It's posted above
|
Jeff
Dodge Dakota
JOIN HERE
7/07/2002
11:08:46
|  RE: M1 Intake Turtle Results
IP: Logged
Message:
I got this from one of the guys.
From : Bonefishmon@aol.com
To : flameredrt@hotmail.com
Subject : Re: Att: Jeff Arnold, Love that Turtle!!!!!!
Date : Sun, 7 Jul 2002 10:21:00 EDT
I installed the large turtle on the 5th. Wow! What a great mod for the
money. Anyone out there that has not considered one for their M1 intake is
missing the boat. I have the 2bbl. M1 with headers, 3" exhaust, FIPK,
Transgo, MP PCM, 2400 stall and a 50mmTB.
No dyno needed for results. I realize now that I did lose some low end with
the M1 install.
It's back big time!!!!!
Thank you Jeff Arnold!!!!!!!!!!
Sheffy
2000 RC R/T
|
MikeD
*R/T*
7/07/2002
14:27:26
| RE: M1 Intake Turtle
IP: Logged
Message:
Hey man you outta post that on that thread "1/4 miles times of 14.0 or better"...they were havin a big discussion about whether or not to get the M-1 because of torque loss...that little turtle might change their mind.
~Mike~
Get In...Sit Down...Shutup...& Hangon
|
Boomer
Dodge Dakota
JOIN HERE
7/08/2002
00:44:04
| RE: M1 Intake Turtle
IP: Logged
Message:
I have a lot of parts awaiting install that I have recently purchased for my 97 4x4 5.2. I was going to do it as a step-by-step add on to see the difference of each part. Screw that! I want the stuff on my truck. I have the R/T cam set w/ 1.7RR, M-1 (hopefully turtle), Mopar PCM, K&N GenII, e-fan, RS 180 T-stat, MSD Offroad w/ coil & wires, and a 50mm TB, all awaiting install and some are in the mail. Time to get working, but I can wait until I get the turtle.
Oh what fun it will be...to cake my truck in mud.
Boomer
|
slider_buck
Dodge Dakota
JOIN HERE
7/08/2002
01:32:47
| RE: M1 Intake Turtle
IP: Logged
Message:
where exactly does it go? do you have to remove the m1 to install it?
|
Boomer
Dodge Dakota
JOIN HERE
7/08/2002
01:39:20
| RE: M1 Intake Turtle
IP: Logged
Message:
From what little I know, it goes into the center of the manifold. It screws into the hole in the bottom.
Boomer
|
slider_buck
Dodge Dakota
JOIN HERE
7/08/2002
01:46:20
| RE: M1 Intake Turtle
IP: Logged
Message:
never mind on that previous post, found another post that told where it goes. has anyone dynoed there truck after this?
|
oetkenjc
R/T
7/08/2002
11:25:00
| RE: M1 Intake Turtle
IP: Logged
Message:
uhm... how about filling us in where you found it then ?
jonathan
Best Run: .520rt, 2.138 60foot, 15.041secs @ 89.44mph
PCM, 160 degree Tstat, Nitto 450's, Darkfury's homemade SS Grill (www.chimptopia.com/pimptopia/grille.html)
|
slider_buck
Dodge Dakota
JOIN HERE
7/09/2002
22:42:48
| RE: M1 Intake Turtle
IP: Logged
Message:
uhm, like i said other posts. run a search for m1 turtle
|
Jeff
Dodge Dakota
JOIN HERE
7/30/2002
11:35:13
|  RE: M1 Intake Turtle
IP: Logged
Message:
I just got some more made...
I have them for the 4bbl M1 and The 2bbl M1 now...in 2 sizes.
The small one seems to work well all around, and the large one moves the Toruqe down about 200 RPM more.
They are $40.00 + $6.00 shipping each.
Some of the guys have been getting both a large and a small and I let them have them for $70.00 + $6.00 shipping then.
I need to know if you have the 2 or 4 bbl and what size you want.
I take Paypal at this address. FlameRedRt@hotmail.com
Or you can mail a Money Order to me
Jeff Arnold
c/o J&H Machine Tools
4345 Morris Park Dr.
Charlotte NC 28227
Jeff
|
Eazy
Dodge Dakota
JOIN HERE
7/30/2002
12:00:27
| RE: M1 Intake Turtle
IP: Logged
Message:
Jeff: Can you e-mail me with some more info on what they look like and how they work? Also do you take personal checks? ericsven49@hotmail.com
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
