| From | Message |
Ottawa 99 RT
Dodge Dakota
JOIN HERE
6/26/2002
08:29:32
|
 Subject: TV-cable adjustments
IP: Logged
Message:
Just want to clear up something... when you pull the cable outward (towards the front of the truck), it makes it shift later/firmer right? And when you push it in towards the truck, it's for softer/earlier shifts?
The thing is damn sensitive! Don't have to move it much to make a diff.
|
CW
GenIII
6/26/2002
08:55:59
|  RE: TV-cable adjustments
IP: Logged
Message:
Pull the cable to the rear of the truck makes it shift firmer/later.
2001 4.7HO RC 5sp 3.92 LSD
Click on thumbnail for mods.
|
Ottawa 99 RT
Dodge Dakota
JOIN HERE
6/26/2002
13:06:04
|  RE: TV-cable adjustments
IP: Logged
Message:
Ok I will play with it a bit more... any idea on where the stock location is??
Also, would adjusting this fix my problem of when I floor the truck, it not making shifts unless I let off the gas a little? What happens is at WOT, it just bounces off the rev-limiter and won't shift. I noticed this last time at the track and after I put Mopar headers on.
Thanks!
|
Andy VH
Dodge Dakota
JOIN HERE
6/26/2002
13:14:15
| RE: TV-cable adjustments
IP: Logged
Message:
Sounds like you have it adjusted to tight.
With no slack it will hold the shift just as you describe. It's so easy to "play" with you'll be able to find what suits you best.
|
Ottawa 99 RT
Dodge Dakota
JOIN HERE
6/26/2002
13:24:23
| RE: TV-cable adjustments
IP: Logged
Message:
So just take the clip off and pull the cable to the front of the truck? (for a looser/earlier shift?)
|
Troy
Dodge Dakota
JOIN HERE
6/26/2002
13:56:44
| RE: TV-cable adjustments
IP: Logged
Message:
that's correct.
|
Ottawa 99 RT
Dodge Dakota
JOIN HERE
6/26/2002
14:14:20
| RE: TV-cable adjustments
IP: Logged
Message:
So I should try moving it say, 1mm out at a time?
Anyone know the factory location on where this thing is set to?
Right now it's lined up at the end of the pointy part (picture a bullet) - the end of the tip where it is straight - right at the end of the tip is where it is lined up against the stationary part. Hard to explain!!
|
Ottawa 99 RT
Dodge Dakota
JOIN HERE
6/26/2002
22:45:35
| RE: TV-cable adjustments
IP: Logged
Message:
Ok after playin with it a bit... I found a nice place where the shifts are nice n smooth again, and the clunks are gone! WOOHOO!!! Damn thing is very sensitive! Moving it a fraction of an inch makes a huge diff!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
