Forums
Forum Tools
|
 |
22:16:09 - 04/25/2024
Dakota Performance
| From | Message |
kota on 20s
GenIII
 
5/29/2002
02:32:56
|
 Subject: think this will fit?
IP: Logged
Message:
unfortunat for me, i have the stock 15x7" wheels and i want some drag radials. the BFG comp TA drag radial goes from a 235 and jumps to a 275. the nitto 555R has a even bigger gap from 205 to a 275!
soooo, do you think i can get away with squeezing the 275's on my 7" rim? i think i have seen somewhere that says 7" is the minimun and somewhere else says 7.5" is the min.
i know handling will suck, but i am only going to run them at the track. what do you guys think?
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
Lew360
Dodge Dakota
JOIN HERE
5/29/2002
02:50:15
| RE: think this will fit?
IP: Logged
Message:
I have 315/35/17 on my stock R/T rims which are 17x9. The nitto site says the minimun wheel width is 10.5. they look really good and hook great on the street.
|
YA
Dodge Dakota
JOIN HERE
5/29/2002
04:46:43
| RE: think this will fit?
IP: Logged
Message:
I have 275/50/15 BFG street radials on a 8" wheel and they are a little to big. Tire wears a little more in the center. I run them at 30 psi.
For track only you should be ok with 275. Most people run the drag radials at 18-20 psi.
The 235 would still work great. Both tire sizes will offer about the same traction.
Good luck.
|
kota on 20s
GenIII
5/29/2002
17:21:45
| RE: think this will fit?
IP: Logged
Message:
yeah i was thinking about it today at work, and i will probably stick with the 235's thanks guys!
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
