Forums
Forum Tools
|
 |
21:15:09 - 04/26/2024
Dakota Performance
| From | Message |
DakotaMan
Dodge Dakota
JOIN HERE
5/20/2002
11:47:46
|
 Subject: Please read Gear change problem
IP: Logged
Message:
Well I thought I would take the plunge and go big I have a 98 club cab 3.9L Dakota. I am putting a performance accessories 3" lift and a 3" suspension lift Fabtech. I was changing the gears to 4.56 and posi to allow for the 33's and a little fun. Well what happened is I broke some of the ring gear bolts taking them out of the old ring gear so I have to find new ones and they are Left hand 3/8 fine thread not easy to find in this town probably have to order some. My problem is I don’t know how to get the speed sensor gear off the old carrier without messing it up.. Does anyone know how to do this it is pressed on and there is not much area to get a punch or a press on to push it off any ideas.
|
B1llyw
GenIII
5/20/2002
11:57:36
|  RE: Please read Gear change problem
IP: Logged
Message:
I'm not sure how to get the sensor off but P4529486 is the MOPAR performance part number you need for a set of ring gear bolts for your differential. It should only run you around $5.
Bill White - 2002 QC 4x4, SLT , 4.7, 5 spd, 3.92's w/LSD, Airaid, MBRP Super Single, Hurst T-Handle, BFG A/T's, IAS Shocks, 180 T-Stat, Jet Chip - Stage II
|
DakotaMan
Dodge Dakota
JOIN HERE
5/20/2002
15:39:01
|  RE: Please read Gear change problem
IP: Logged
Message:
Thank you very much I appreciate your help, these bolts are almost impossible to find.
|
B1llyw
GenIII
5/20/2002
15:47:25
| RE: Please read Gear change problem
IP: Logged
Message:
Happy to help. I just broke off the antenna stud on my father's 95. :) Had to order a new one. I know you feel.
Bill White - 2002 QC 4x4, SLT , 4.7, 5 spd, 3.92's w/LSD, Airaid, MBRP Super Single, Hurst T-Handle, BFG A/T's, IAS Shocks, 180 T-Stat, Jet Chip - Stage II
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
