| From | Message |
Troy
Dodge Dakota
JOIN HERE
5/06/2002
16:42:56
|
 Subject: how much improvement?
IP: Logged
Message:
I would like anyone's opinion on this. I would like to know what everyone thinks I have now, in hp/ torque (please specify engine or rear-wheel), and what everyone thinks I will have after listed future mods. Thanks for your time.
Current:
2000 QC Sport Plus 4x4 5.9L 3.92LS, every factory option
equal-length headers and larger y-pipe
Magnaflow single in/ dual out (2-1/2" muffler shop tailpipes)
Autolite 3923's, indexed
Kenne Bell (Taylor) wires
180 stat
Redline Water Wetter
S-bolt
Homemade 4" cold-air induction
Baffled removed from air hat
K&N air filter
Mobil 1 and Purolator
Perma-Cool auxiliary oil cooler
Map sensor mod
TPS set at .774
clutch fan removed (electric fan only on thermal switch)
Future mods:
25% underdrive crank pulley
1.7 roller rockers
M1 intake
50 or 52mm tb
MSD coil
IAT sensor
o2 SIMM (remove cat)
synthetic fluid in trans and rear axle
keep factory heads and cam: no nitrous or s/c
|
macman37
Dodge Dakota
JOIN HERE
5/06/2002
17:01:12
| RE: how much improvement?
IP: Logged
Message:
Prolly about 750 hp.
|
Duner
Dodge Dakota
JOIN HERE
5/06/2002
17:58:53
|  Just a guess!
IP: Logged
Message:
You are probably making about 210 rwhp with about 285 rwtq right now.
I think after all those mods you would probably be in the 250-255 rwhp and 305-310 rwtq range.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
