| From | Message |
BlueCC00R/T
Dodge Dakota
JOIN HERE
5/04/2002
21:32:21
|
 Subject: Next Mod?
IP: Logged
Message:
i have a K&N FIPK Gen II and Flowmaster exaust autolite 3923's 180 t-stat brass cap & rotor IAT Adjuster(from speedtweaks)Removed clutch fan.. what would be the next best mod? MSD ignition M-1? Headers 52mm TB Hi flow Cat?
i can only get 1 mod every other month or so($500.00) so i want to save my penny's for the most improvement... damn addictive personality's lol
|
kota on 20s
GenIII
5/04/2002
21:42:50
| RE: Next Mod?
IP: Logged
Message:
my vote is for the 2bbl M-1. i have heard the msd dosent give you any power.
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
CW
GenIII
5/04/2002
22:20:17
|  RE: Next Mod?
IP: Logged
Message:
I vote for M-1 as well. From what I have heard they work very well.
2001 4.7 RC 5sp 3.92 LSD
Click on thumbnail for mods.
|
BlueCC00R/T
Dodge Dakota
JOIN HERE
5/04/2002
23:20:46
| RE: Next Mod?
IP: Logged
Message:
Thx guys... forgot to mention tht i dont have a mopar pcm either....dont know where to buy one
:o(
|
kota on 20s
GenIII
5/05/2002
01:28:52
| RE: Next Mod?
IP: Logged
Message:
i dont have a pcm either. they dont make one for my aplication (5 speed)
you might want to talk to john mercedes at www.southeastrt.com
the M-1 will give more power than the pcm, but i'd get the pcm after the manifold because the engine will like to rev higher than the stock computer can go with the M-1 (if that makes sence)
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
Bob W
GenI
5/05/2002
02:15:57
| RE: Next Mod?
IP: Logged
Message:
Help me out here I don't know what an M1 IS or Do'es but I would like to.
|
kota on 20s
GenIII
5/05/2002
02:18:26
| RE: Next Mod?
IP: Logged
Message:
it is a manifold made by mopar. makes real good power
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
5pnt9ltrluv
R/T
5/05/2002
10:17:43
| RE: Next Mod?
IP: Logged
Message:
Yeah, the M1 intake manifold is for 5.2L and 5.9L's. Not only do they add power....They make your engine look purdy.......hehe
Kris
2002 Atlantic Blue R/T
Current Mods: True dual Flowmaster 40 Series Original (dumped), MSD 6A Ignition w/ Blaster SS coil and Taylor Spirocore 8mm, 360 Intakez w/ 9" K&N, Flowmetrics 50mm billet throttle body, JBA ceramic headers, Autolite 3923's, 180 degree T-stat, TPS @ .725 v
|
kota on 20s
GenIII
5/05/2002
13:17:19
| RE: Next Mod?
IP: Logged
Message:
hell yea they do. that stock "beer barrel" is uuuuuugly
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
