| From | Message |
Dakota Bob
GenII
 
4/15/2002
09:59:33
|
 Subject: MSD Blaster SS Coil
IP: Logged
Message:
Im getting a MSD Blaster SS coil for my 94 3.9 Is this a pretty easy hook up? I know there are only two wires to hook up. I wanted to see if you guys had any tips on it.
Thanks
Bob
94 CC 3.9 Jet chip stage 1 JBA Headers,19# fuel Injectors,Flow master 40s Split Fire Plugs K/N Chrome Filter 180 T Stat ,TPS adjustment,Flometrics throttle body Black Magic 150 JBA wires
|
5pnt9ltrluv
R/T
4/15/2002
11:02:33
|  RE: MSD Blaster SS Coil
IP: Logged
Message:
The only tough thing is finding a good spot to put it....other than that.....EASY!!!
Hey I have an extra coil if you want it....Brand new in box!!! Let me know what you are gonna pay, and i'll beat it.....hehe
Kris
2002 Atlantic Blue R/T
Current Mods: True dual Flowmaster 40 Series Original (dumped), MSD 6A Ignition w/ Blaster SS coil and Taylor Spirocore 8mm, 360 Intakez w/ 9" K&N, Flowmetrics 50mm billet throttle body, JBA ceramic headers, Autolite 3923's, 180 degree T-stat, TPS @ .725 v
|
pyrodak
*GenIII*
4/15/2002
11:38:28
| RE: MSD Blaster SS Coil
IP: Logged
Message:
Hey Kris,
What exactly will the Blaster coil do for me if I get one (especially with my current mods)? And what else would I need to add? And if Bob doesn't buy it from ya, how much do you want for it?
Thanks,
Mark S.
98 Club Cab 4X2 SLT 3.9
|
5pnt9ltrluv
R/T
4/15/2002
11:40:43
| RE: MSD Blaster SS Coil
IP: Logged
Message:
It will help a little bit, give you a stronger spark. You could also benefit from a MSD ignition amp....
Kris
2002 Atlantic Blue R/T
Current Mods: True dual Flowmaster 40 Series Original (dumped), MSD 6A Ignition w/ Blaster SS coil and Taylor Spirocore 8mm, 360 Intakez w/ 9" K&N, Flowmetrics 50mm billet throttle body, JBA ceramic headers, Autolite 3923's, 180 degree T-stat, TPS @ .725 v
|
4wDakota
GenIII
4/15/2002
12:07:04
| RE: MSD Blaster SS Coil
IP: Logged
Message:
So how exacly do you wire it?
Is it easy to wire and keep the stock one in place as a spare?
98 CC 4x4, 5.2 Auto 3.55LSD
|
5pnt9ltrluv
R/T
4/15/2002
12:12:32
| RE: MSD Blaster SS Coil
IP: Logged
Message:
Yeah, you could leave the stock in place. All you have to do is clip 2 wires from the stock coil and put them on the Baster coil. Then connect the coil wire....it would take about 20 minutes. You have to just find a good mounting spot, also depending on where you put it, you might have to extend teh wires some. I mounted mine on the heat shield for my intake....hehe
Kris
2002 Atlantic Blue R/T
Current Mods: True dual Flowmaster 40 Series Original (dumped), MSD 6A Ignition w/ Blaster SS coil and Taylor Spirocore 8mm, 360 Intakez w/ 9" K&N, Flowmetrics 50mm billet throttle body, JBA ceramic headers, Autolite 3923's, 180 degree T-stat, TPS @ .725 v
|
dakota matt
GenIII
4/15/2002
16:42:52
| RE: MSD Blaster SS Coil
IP: Logged
Message:
I just installed mine this weekend with an MSD 6AL, ACCEL brass cap and rotor, MSD 8.5mm wires and Autolite 3923 sparkplugs. I ended up mounting my SS Blaster coil on the heatshield for my intake too.
Matthew Lee
|
Dakota Bob
GenII
4/15/2002
20:26:24
| RE: MSD Blaster SS Coil
IP: Logged
Message:
Thanks guys for the in put. I have mine ordered all ready 5pnt9ltrluv. I should get it tomorrow or the next day. I got it from Summit Racing for $44.91 wish I would have known sooner.
Thanks
Bob
94 CC 3.9 Jet chip stage 1 JBA Headers,19# fuel Injectors,Flow master 40s Split Fire Plugs K/N Chrome Filter 180 T Stat ,TPS adjustment,Flometrics throttle body Black Magic 150 JBA wires
|
justin
Dodge Dakota
JOIN HERE
4/15/2002
20:55:03
| RE: MSD Blaster SS Coil
IP: Logged
Message:
i put mine right where my old one was, it fit perfectly.
|
Dakota Bob
GenII
4/16/2002
22:03:37
| RE: MSD Blaster SS Coil
IP: Logged
Message:
I got the Blaster put in today I mounted it under the pcm on the fender well. Started it up and drove it seems to be a lot smoother idle. Do I need to regap my plugs they are set at 35 the stock setting do I keed to take them to 40?
Should I have reset the pcm too?
Thanks
Bob
94 CC 3.9 Jet chip stage 1 JBA Headers,19# fuel Injectors,Flow master 40s Split Fire Plugs K/N Chrome Filter 180 T Stat ,TPS adjustment,Flometrics throttle body Black Magic 150 JBA wires
|
5pnt9ltrluv
R/T
4/16/2002
22:38:38
| RE: MSD Blaster SS Coil
IP: Logged
Message:
It is a good idea to reset the PCM. Also, you don't have to regap unless you are running a blower or nitrous....
Kris
2002 Atlantic Blue R/T
Current Mods: True dual Flowmaster 40 Series Original (dumped), MSD 6A Ignition w/ Blaster SS coil and Taylor Spirocore 8mm, 360 Intakez w/ 9" K&N, Flowmetrics 50mm billet throttle body, JBA ceramic headers, Autolite 3923's, 180 degree T-stat, TPS @ .725 v
|
Dakota Bob
GenII
4/16/2002
22:49:48
| RE: MSD Blaster SS Coil
IP: Logged
Message:
Thanks 5pnt9ltr. I will reset it tomorrow.
Bob
94 CC 3.9 Jet chip stage 1 JBA Headers,19# fuel Injectors,Flow master 40s Split Fire Plugs K/N Chrome Filter 180 T Stat ,TPS adjustment,Flometrics throttle body Black Magic 150 JBA wires
|
5pnt9ltrluv
R/T
4/16/2002
22:57:48
| RE: MSD Blaster SS Coil
IP: Logged
Message:
No Prob Bob!!!!
Kris
2002 Atlantic Blue R/T
Current Mods: True dual Flowmaster 40 Series Original (dumped), MSD 6A Ignition w/ Blaster SS coil and Taylor Spirocore 8mm, 360 Intakez w/ 9" K&N, Flowmetrics 50mm billet throttle body, JBA ceramic headers, Autolite 3923's, 180 degree T-stat, TPS @ .725 v
|
pyrodak
*GenIII*
4/17/2002
02:02:18
| RE: MSD Blaster SS Coil
IP: Logged
Message:
Sounds like "Bob the Builder" LOL :) (sorry....got a little boy!)
Later,
Mark S.
98 Club Cab 4X2 SLT 3.9
|
Dakota Bob
GenII
4/17/2002
06:34:57
| RE: MSD Blaster SS Coil
IP: Logged
Message:
Pyrodak, Thats Bob the Painter, lol
94 CC 3.9 Jet chip stage 1 JBA Headers,19# fuel Injectors,Flow master 40s Split Fire Plugs K/N Chrome Filter 180 T Stat ,TPS adjustment,Flometrics throttle body Black Magic 150 JBA wires
|
LiveDakota
Dodge Dakota
JOIN HERE
8/25/2002
22:06:02
| RE: MSD Blaster SS Coil
IP: Logged
Message:
Is this the correct coil for my 00' 3.9?
http://store.summitracing.com/partdetail.asp?part=22439
Thanks,
Thomas
|
Dakota Bob
GenII
8/27/2002
06:29:16
|  RE: MSD Blaster SS Coil
IP: Logged
Message:
Had to take off the Blaster coil it had a miss from 1600 to 2000 rpms checked a few things out and put the stock coil back in and the miss went away.
Bob
94 CC 3.9 JBA Headers,19# FI,Flow Master 40s, Auto Lite Plugs, K/N Chrome Filter, 195 T Stat ,TPS Adjustment,Flometrics TB, Mopar Wires
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
