| From | Message |
bowtiekiller
Dodge Dakota
JOIN HERE
4/14/2002
20:52:35
|
 Subject: Performance on a shoestring
IP: Logged
Message:
Hello im looking to beef up my 01 dak 4.7 and here the catch $1500 is all i have to work with thats all my mom (WIFE) will let me get away with im already planing to build a home brew air intake so there you have it parts and locations to buy it like to get in the mid 14s thanks (soon to be bowtiecrusher)
|
Danny Price
Dodge Dakota
JOIN HERE
4/14/2002
21:05:03
|  RE: Performance on a shoestring
IP: Logged
Message:
Well. Im new here also. and looking for get my 99 R/T a little faster. What Ive been told is to go with the pcm first, than a TB Fastman F&B or whatever. I know mopar doesnt make a pcm for the 2001 models correct? Soo... Maybe Fastman TB, Mopar headers, Borla Catback Exhaust?
Just a few opinions
Dan
|
slider_buck
Dodge Dakota
JOIN HERE
4/14/2002
21:13:33
| RE: Performance on a shoestring
IP: Logged
Message:
Danny,if you are going to go with the pcm first i would definately get the m1 next. the pcm raises the shift points up to 5200 where the stock beer kager falls on its face. i had the pcm in for a couple days before my m1 install. it felt like it fell on its face on top end after around 4800. i would definately think about investing in the 2 at the same time or at least get the m1 first. just my $.2
|
kota on 20s
GenIII
4/14/2002
22:50:20
| RE: Performance on a shoestring
IP: Logged
Message:
thats good advice. dont worry about the TB for a little while, it only adds about 5-8 rwhp. after you get the M-1, and other mods it will become the weak link, but now i wouldnt worry about it.
hey slider_buck, what kinda hp gains did you get out of the pcm? since i have a 5speed, i have to flash mine, and i dont know if its worth $400 what do you think? since i have the M-1 i know i would benifit from the raise of the rev limiter, but $400 is $400.
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
slider_buck
Dodge Dakota
JOIN HERE
4/14/2002
23:03:18
| RE: Performance on a shoestring
IP: Logged
Message:
one thing about the m1 is how well it does in the upper rpm range, that 400 to raise the limiter might be worth an extra 20 horse or so. it definately pulls hard clear up to 5200. i used my gtech after i had installed the m1 and pcm. it showed me about 30 extra horse between the two. not so sure i agree with this. i have read other posts where the m1 has shown around 30 extra horse just by itself.
|
kota on 20s
GenIII
4/16/2002
01:43:52
| RE: Performance on a shoestring
IP: Logged
Message:
slider_buck, what mods do you have?
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
