Forums
Forum Tools
|
 |
03:39:06 - 04/25/2024
Dakota Performance
| From | Message |
Alan
Dodge Dakota
JOIN HERE
4/07/2002
04:16:26
|
 Subject: K&N xstream filters
IP: Logged
Message:
Has anybody tried out this type of K&N filter? Was curious if it works any better
Alan
98 V6 auto CC w/mods
|
kota on 20s
GenIII
4/08/2002
00:25:21
|  RE: K&N xstream filters
IP: Logged
Message:
i have heard by adding the extream top, it dosent add any hp, because the throttle body can not take in that much air
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
Alan
Dodge Dakota
JOIN HERE
4/08/2002
01:01:17
| RE: K&N xstream filters
IP: Logged
Message:
I was wondering about the cone type filters.
Alan
98 V6 auto CC w/mods
|
kota on 20s
GenIII
4/08/2002
01:06:34
| RE: K&N xstream filters
IP: Logged
Message:
the extream filter is the lid to the 14" round filter. normally it is a chrome pice.
if you want to know if a K&N FIPK works better than stock, the answer is yes. i dont know what you would gain on a v6, but im sure you would be able to tell a differance
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
Alan
Dodge Dakota
JOIN HERE
4/08/2002
01:13:39
| RE: K&N xstream filters
IP: Logged
Message:
Kota,I have an airaid intake,saw an ad for the xstream and was just wondering if there was a big difference.
Alan
98 V6 auto CC w/mods
|
kota on 20s
GenIII
4/08/2002
01:18:23
| RE: K&N xstream filters
IP: Logged
Message:
airaid uses a K&N filter (or something exactly the same) so by replacing it with another filter will not give you anything.
i thought the extream line of filters were JUST the filter lids for the 10-14" round filters? did they expand their line?
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
Lew360
Dodge Dakota
JOIN HERE
4/08/2002
01:33:59
|  RE: K&N xstream filters
IP: Logged
Message:
K&N does make a whole line of xtreme filters. The extreme cone is some what like the Intense Performance or S&B filters. The K&N filters have a flat filter at the end were as the Intense Performance and S&B have a inverted cone. These filters will allow air to go straight into the intake pipe instead of making a 90 deg. turn into the pipe from the sides.
'99 RC Dakota R/T,Custom Cold-Air,Gibson
Headers and Cat-back,APC clear tails,MSD 6a,BTM, IAT adjuster,Powerdyne Supercharger.
|
kota on 20s
GenIII
4/08/2002
01:38:19
| RE: K&N xstream filters
IP: Logged
Message:
cool, hey lew, how do you like you powerdyne? is it at 6#'s? have you had any problems, and how long has it been on?
sorry for getting off track
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
Lew360
Dodge Dakota
JOIN HERE
4/08/2002
01:46:45
|  RE: K&N xstream filters
IP: Logged
Message:
I love my Powerdyne. Yeah for now it is only a 6#. It was easy to put on and after a few minor problems has been trouble free. I had to get the MSD BTM and a set of 24LBS. injectors but that took care of my problems. It was a christmas present from my wife and I didn't get it till after New Years so I guess it has been about 4 months now.
'99 RC Dakota R/T, Custom Cold-Air, Gibson
Headers and Cat-back, APC clear tails,
MSD 6a, BTM, IAT adjuster, Powerdyne Supercharger.
|
kota on 20s
GenIII
4/08/2002
01:49:24
| RE: K&N xstream filters
IP: Logged
Message:
how much was the btm? was that hard to install? i am thinking of getting a supercharger down the line, and i want to know everything i need before i get it.
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
Lew360
Dodge Dakota
JOIN HERE
4/08/2002
01:55:15
| RE: K&N xstream filters
IP: Logged
Message:
I already had the MSD 6A so I bought a stand alone BTM it was I think like $180 or $190 i forget exactly.
'99 RC Dakota R/T, Custom Cold-Air, Gibson
Headers and Cat-back, APC clear tails,
MSD 6a, BTM, IAT adjuster, Powerdyne Supercharger.
|
kota on 20s
GenIII
4/08/2002
01:57:56
| RE: K&N xstream filters
IP: Logged
Message:
well if i dont have a msd ignition, can i get a stand alone? or do i have to have the ignition for it to work?
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
Lew360
Dodge Dakota
JOIN HERE
4/08/2002
02:08:46
|  RE: K&N xstream filters
IP: Logged
Message:
MSD makes a stand alone that will work with the stock ignition. I know for sure that the stock ignition one cost a little less and they have a different part number (MSD-5462) than the ones for the MSD ignition. Of corse you could just buy the MSD 6btm and get the ignition, btm and soft rev rpm limiter. The 6btm is like $320, but you get it all.
|
kota on 20s
GenIII
4/08/2002
02:10:47
| RE: K&N xstream filters
IP: Logged
Message:
sweet, thank you for all of the info!
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
