Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
10:16:02 - 04/23/2024

Dakota Performance
FromMessage
slowblack
Dodge Dakota
JOIN HERE
 Email

3/22/2002
12:35:35

Subject: just got back from track
IP: Logged

Message:
i just got back from the local dragstrip with my 96 dakota 2.5l 4cyl. i did not have a very good run. i have the truck about 6 months i have no tac. so i dont know what rpm to launch at. i tried at about 3000 and it seemed to do okay but im not to happy about the time my fastest time of the night was an 11.73 @57.57mph the only mod. i have is a 40 seris flowmaster and tracktion bars. i ran with about 23 psi in the rear. if you know what i can do to get that thang faster without running it in to a brick wall and getting another please tell me.
thanks slowblack



Diligent Dave
Dodge Dakota
JOIN HERE
 Email

3/22/2002
12:53:29

RE: just got back from track
IP: Logged

Message:
Hey!! I have a 95 RC Sport 2.5L 5 Speed I also have the 40 Series on mine, but I disconnect it when race. My best 1/8 is 11.792 @ 55.XX mph. I do not have traction bars and I did not lower my air pressure either.

I don't have a tach either so what I do is just bring the rpm up off idle but not too high and then dump the clutch. When done correct I get just a hair of spin and no bogging.

Have fun with your truck!



IntenseDak39
GenIII
 User Profile


3/22/2002
15:01:23

RE: just got back from track
IP: Logged

Message:
ever wonder why they put tachs in the auto's but not the standards?

dave... connect that muffler, it will actually help out. if you are gonna run it disconnected you might as well take it off and save some weight.

intense

"How's my driving?........Race me and find out!"

   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.