Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
19:14:09 - 04/25/2024

Dakota Performance
FromMessage
DakotaHEMI
Dodge Dakota
JOIN HERE
 Email

2/10/2002
22:11:09

Subject: Rear axle sizes
IP: Logged

Message:
Is the R/T rear axle the same size I have in my 3.9L SLT?



CW
GenIII
 Email User Profile


2/10/2002
22:16:57

RE: Rear axle sizes
IP: Logged

Message:
Your 3.9 probably has a 8.25" 10 bolt cover and the R/T has a 9.25" 12 bolt cover.

2001 RC 4.7 5sp 9.25" 3.92 LSD
Ported 68mm throttle body, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" cold air, Roadmaster active suspention, Removed Third cat. Electric fan Convertion, Awaiting HO cams.
Working on adjustable fuel pressure with return.

DakotaHEMI
Dodge Dakota
JOIN HERE
 Email

2/10/2002
22:38:08

RE: Rear axle sizes
IP: Logged

Message:
Thank you. You have any idea where I can get a new 9.25'' reat axle and a magnum 360 block (Just the block)? I want to do a 408 stroker build-up. Thanks for any help you can provide.



Crusty
GenIII
 User Profile


2/10/2002
22:49:13

RE: Rear axle sizes
IP: Logged

Message:
Summit should have a 360 block.
Junk yards should have a rear axle, or you could go to Mopar and pay through the a.. for it.

2002 CC 4x4 4.7L 5spd 3.55 LSD

DakotaHEMI
Dodge Dakota
JOIN HERE
 Email

2/10/2002
23:05:56

RE: Rear axle sizes
IP: Logged

Message:
Only place I have found a non-crate 360 block is Jeg's, but it was a short block. I don't want the pistons, cam, etc. I guess I could call and ask them how much for just the block. Is mopar and their 200% price increase the only place I could get a new 9.25'' rear axle? Or would going to a junk yard and hoping I find a rear end in good condition my best choice?



CW
GenIII
 Email User Profile


2/10/2002
23:33:54

RE: Rear axle sizes
IP: Logged

Message:
Look into the junk yards for both.

2001 RC 4.7 5sp 9.25" 3.92 LSD
Ported 68mm throttle body, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" cold air, Roadmaster active suspention, Removed Third cat. Electric fan Convertion, Awaiting HO cams.
Working on adjustable fuel pressure with return.

   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.