| From | Message |
DakotaSilver
Dodge Dakota
JOIN HERE
1/30/2002
17:43:17
|
 Subject: Torsion Bar Torque?
IP: Logged
Message:
I just rebuilt a '01 QC 4.7 4x4. I put a new frame under the truck. The question I have is, " My truck doesn't set as high in the front as the other 4x4 Dakotas. Could it be because the torsion bars arent tightened enough? Please respond!
|
kevster
Dodge Dakota
JOIN HERE
1/30/2002
21:23:53
|  RE: Torsion Bar Torque?
IP: Logged
Message:
Have you tried turning the Adjust bolts clockwise to gain heighth? if you measure from the ground to the fender lwr lip, should be 36 1/2" high. rear is 37 1/2" high. this is my 2002 quad cab 4x4 measurements with the 265x70x16 wheels tires.
|
DakotaSilver
Dodge Dakota
JOIN HERE
1/30/2002
23:01:56
| RE: Torsion Bar Torque?
IP: Logged
Message:
No I haven't tried it yet. I kind of just noticed that mine sets a little lower than everyone elses.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
