Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
08:42:37 - 09/22/2021

Dakota Performance
FromMessage
luke kronsted
Dodge Dakota
JOIN HERE
 Email

1/24/2002
00:04:18

Subject: 2.5 liter
IP: Logged

Message:
would a chip help or no i want more power but im not sure what to do would exhaust help at all if so what should i do .



Jeff
Dodge Dakota
JOIN HERE
 Email

2/13/2002
16:04:53

RE: 2.5 liter
IP: Logged

Message:
Hey man, first thing I did was put on the K&N filter, then changed my plugs for more fire power, also changed my plug wires to 8mm. This help me a bit, but I dont know factually how much. You will be able to tell the difference though.

98 cc sport 2.5l



Cotharyus
Dodge Dakota
JOIN HERE
 Email

2/14/2002
08:24:16

RE: 2.5 liter
IP: Logged

Message:
I would look at an intake kit and a ported TB - I know of two places where you can get an intake kit:

www.360intakes.com - although Joe out there says that he can't verify that the new intake with a heatshield fits the 2.5 properly.

www.krcperformance.com - they custom make a kit JUST for the 2.5. Cost at both places is about 200 clams. KRC also is the only place I know of that will do TB work on the 2.5.

If you want to keep any low end at all, stay away from new exhaust for now, and make sure you look at the spark plug write up at www.speedtweaks.net.



slammedkota
Dodge Dakota
JOIN HERE
 Email

11/26/2002
19:34:13

RE: 2.5 liter
IP: Logged

Message:
i have changed my plugs to bosch platinum 2 and an flowmaster 50 series on my truck and 8mm plug wires and have seen a big difference. i out ran a 4.3 the other day!

Going Somewhere!!



Ron
Dodge Dakota
JOIN HERE
 Email

12/18/2002
08:02:11

RE: 2.5 liter
IP: Logged

Message:
Does anyone know where I can purchase the Mopar header that fits the 2.5?



Craig
Dodge Dakota
JOIN HERE
 Email

12/19/2002
13:32:49

RE: 2.5 liter
IP: Logged

Message:
go to www.krcperformance.com, the custom fit K&N FIPKs to fit the 2.5, plus they do a combo by also adding 50 CNC throttle body a M-1 2bbl intake manifold to the K&N for a boost of 30-35 ponnies. check it out.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.