| From | Message |
Troy
Dodge Dakota
JOIN HERE
1/14/2002
14:00:53
|
 Subject: tranny sensors
IP: Logged
Message:
I have heard several people on this forum talking about a sensor on the transmission failing, and causing the trans to not shift between 1st and 2nd gear. I am referring to an automatic, by the way. Can anyone tell me if, and where, you can buy this sensor. My truck hits the rev limiter, and will not shift out of 1st when at WOT. I would like to try to replace this sensor if it is available.
2000 QC Sport Plus 4x4 5.9L 3.92LS, every factory option
equal-length headers and larger y-pipe
Magnaflow single in/ dual out
Autolite 3923's, indexed
Kenne Bell (Taylor) wires
180 stat
Redline Water Wetter
S-bolt
Homemade 4" cold-air induction
Baffled removed from air hat
K&N air filter
Mobil 1 and Purolator
Perma-Cool auxiliary oil cooler
Map sensor mod
adjusted TPS from .568 to .764
|
Graphite
DakotaEnthusiast
1/14/2002
22:10:42
| RE: tranny sensors
IP: Logged
Message:
Output speed sensor. The dealer parts counter is one place. Don't know the cost. Was a warranty item
Joe
|
Lance
Dodge Dakota
JOIN HERE
8/14/2002
21:27:23
|  RE: tranny sensors
IP: Logged
Message:
The price for a output speed sensoris $25 at my local dealer. It is really simple to change, just unscrew old one and screw in new one.
|
mechanicmike
Dodge Dakota
JOIN HERE
8/14/2002
22:13:09
| RE: tranny sensors
IP: Logged
Message:
I believe there is an input sensor on the trans as well. I know its there on the intrepid. Anyway its a good idea tho replace both sensors if that is the problem to avoid the chance of any headaches in the future
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
