| From | Message |
JKB
Dodge Dakota
1/05/2002
17:41:17
|
 Subject: transmission temp gauge
IP: Logged
Message:
I have a 2001 dak quad cab and am about to add a trans temp gauge. I don't want to drill into the oil pan so have bought the fittings neccessary to tap into the trans cooler line. The trans has an in line and an out line but I cant tell which is which. one line comes out at the front of the trans and one line comes out at the back. any body which line is the out line that goes to the cooler?
|
CW
GenIII
1/05/2002
19:58:19
|  RE: transmission temp gauge
IP: Logged
Message:
If it is a 3.9 or 5.9. It is the line that comes out of the front of the trans.
2001 RC 4.7 5sp 9.25" 3.92 LSD
Ported throttle body, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" cold air, roadmaster active suspention
|
BlackDak02
GenIII
1/05/2002
22:45:24
|  RE: transmission temp gauge
IP: Logged
Message:
Hey CW, do you know which is the out line to the cooler on the 4.7? Thanks.
2002 Black CC SLT 4x4 4.7L 45RFE 3.55LSRD
|
CW
GenIII
1/05/2002
23:04:08
| RE: transmission temp gauge
IP: Logged
Message:
I am not sure on the 45rfe haven't had much to do with them yet. Probably the front one. Trace the trans line back from the bottom rad line and see what one it hooks to on the trans. (front or rear)
2001 RC 4.7 5sp 9.25" 3.92 LSD
Ported throttle body, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" cold air, roadmaster active suspention
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
