| From | Message |
shawn casey
Dodge Dakota
12/27/2001
02:52:45
|
 Subject: 2001 R/T Need Help
IP: Logged
Message:
Alright I recently purchased a new truck and am kind of new to this. My mods so far are Jacobs Pro Street Ignition, Modified TB, Gibson Headers, Flow Master Mufflers,ASP underdrive pulleys, K&N Gen II induction. What I need help is in the engine control "computer" Dept. I have been told the only chip out there is the JET chip I was told by several people that it wont work with my jacobs ignition, So I called Mopar Performance hotline and the stated "We stopped making performance computers in 2000" So where can I go now?
Help
casey
|
SinCity R/T
Dodge Dakota
12/27/2001
11:37:46
|  RE: 2001 R/T Need Help
IP: Logged
Message:
I've heard mixed results from the Jet chips for the R/T's... Supposedly Stage I is completely worthless, and even the Stage II is close to that.
Unfortunately nobody else makes a computer that you can truly 'buy' like the old 98-00 Mopar PCM's, nor are any of the aftermarket settings as good as the Mopar ones. Below are a couple of websites where you can remove and mail your computer to for a reprogramming session, but each one will run you at least a few hundred dollars. Each company has improved their programming along the way so contact them for specific details, but as far as I'm aware none of them do the whole rev limit/speed limit/timing/tranny/etc. alterations like the Mopars do.
www.asechips.com
www.kennebell.net
Mike Leach does a reprogram of the PCM's as well, but typically for supercharged applications.
www.hypertech.com is supposed to come out with a product "someday" for the 2001+ model years.
|
steveo
Dodge Dakota
12/27/2001
11:42:59
| RE: 2001 R/T Need Help
IP: Logged
Message:
dont forget www.krcperformance.com
www.superchips.com
casey where do you live both these places are in Florida. they do send out but also you can take your truck down there for them to program it.
later
steve
|
shawn casey
Dodge Dakota
12/27/2001
13:04:04
| RE: 2001 R/T Need Help
IP: Logged
Message:
I live in Houston Tx but am in the navy stationed in pascagoula ms. I am also planing to go with the m1 intake and billett fuel rails, roller rockers, anybody know anything about those magnum r/t heads are they worth it are there any better for the same price.
|
MikeD
Dodge Dakota
12/27/2001
17:30:01
| RE: 2001 R/T Need Help
IP: Logged
Message:
I got a 2001 R/T and was wondering about the PCM's too and I called up the dealership and they said they usually don't come out w/ the PCM's of the current year until the year after. He said they should be coming out sometime next year. So far I have an Airaid intake, 52mm F&B TB, Flowmater 40, JBA 9mm wires, Accel Coil...my next upgrade was gonna be either the PCM or the 1.7 rollers. From what I heard about the 1.7's I'm thinkin that'll be my next mod.
~Mike~
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
