| From | Message |
Bristoldak
Dodge Dakota
12/12/2001
22:00:14
|
 Subject: s-bolt
IP: Logged
Message:
I have a simple question:
Is there any performance to be gained by replacing the airhat stud assembly with an "s-bolt"?? It looks like the s-bolt would be smaller and let more air around it to the Throttle body.
Thanks
btw- I have a cat-back, air intake, taylor wires, 3923's 180 stat and a Jet st1 chip on a 99 5.2 4x4 with 3.92 gears
|
Troy
Dodge Dakota
12/13/2001
08:58:33
|  RE: s-bolt
IP: Logged
Message:
Yes, it does help a little. Nothing drastic, but it does help. It can be done in less than 30 minutes, and for less than $2, so it is worth it.
|
Andy VH
Dodge Dakota
12/13/2001
09:23:45
| RE: s-bolt
IP: Logged
Message:
I did it too. It can't hurt and it takes so little time to do it. I used threaded rod, bent to the shape needed. But I also used a nut on the rod to hold its position against the throttle body once I had it in position.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
