| From | Message |
litlpunisher
GenIII
12/07/2001
13:48:16
|
 Subject: timing
IP: Logged
Message:
Does anyone know how much the mopar perf computer advances the timing. Need to know so i can set my retard box so it retards enough for the nos shot I want to spray.
98 Dakota
Bottle fed 340ci
|
Brian024.7
Dodge Dakota
12/07/2001
16:29:37
| RE: timing
IP: Logged
Message:
since its a new computer, it has a 3d map of the timing so really it would be impossible to even began to guess because it is way different at 5000 rpms as it is at idle, if your going to run nitrous, you safest bet would be to take out the computer and put the stock one in. Because there's really no way of knowing how much it advances the timing
|
litlpunisher
GenIII
12/07/2001
17:13:37
| RE: timing
IP: Logged
Message:
Been running nitrous for two years. I was told timing with the perf computer was advanced about 6 degrees so to bring it to zero with 100 shot I retarded 6 with the 150 I needed 8 for my 2 degrees for every 50 shot. just looking for a more specific number because i'm moving up to a 200 to 300 shot.
98 Dakota
Bottle fed 340ci
|
SLEEPER318
Dodge Dakota
12/07/2001
19:59:58
|  RE: timing
IP: Logged
Message:
Marty at KRC Performance told me it advances it 4 degrees. I have a 98 318 with the Mopar chip and a Vortech T-Trim running at 11 psi and I don't have to pull any timing out with my MSD boost timing master with 93 octane. No pinging what so ever. I have 24lb injectors also. I run around town with it set at 1 degree on my Bosst timing retard. But at the trck full timing and no ping. You can call Mike Leach and He'll tell you how much it adds. He did the Mopar Performance computers.
Allen
|
litlpunisher
GenIII
12/07/2001
23:13:44
| RE: timing
IP: Logged
Message:
Your talking to the right person. Marty sold me a used four bbl Tb. And said he 'd help me time the motor
98 Dakota
Bottle fed 340ci
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
