| From | Message |
litl punisher
Dodge Dakota
11/28/2001
18:13:23
|
 Subject: Duner
IP: Logged
Message:
Very interested to hear what you did. Got a friend with a 4.7 5 speeed. Quick truck but it needs a $hit load of help.
|
Duner
Dodge Dakota
11/28/2001
18:19:03
|  RE: Duner
IP: Logged
Message:
I built a single turbo system. It took the truck from 14.60s to 12.70s.... so far.
http://members.home.net/cartel5/Turbo/RTnotTurboPage.html
|
litl punisher
Dodge Dakota
11/28/2001
18:38:19
|  RE: Duner
IP: Logged
Message:
Nice job. It looks real good. I don't think he's interested in doing something like that. he is not very mechanically inclined and I don't feell like doing it for him. I'll just tell him to get a KB charger and call it good. I got enough with mine to worry about
|
Duner
Dodge Dakota
11/28/2001
19:01:38
| RE: Duner
IP: Logged
Message:
I almost bottled it.... but decided on the turbo instead. It was definately a lot more work, but well worth it. I just wanted it to be "different". Due to my poor planning... a bottle always ran out at exactly the wrong time.
So for 12.90s.... is that a 150 shot or do you have some other mods?
|
litl punisher
Dodge Dakota
11/28/2001
19:08:53
| RE: Duner
IP: Logged
Message:
that 12.9 came after a little bit of work. 1st its a club cab so that hurt me. but i got r/t cam roller rockers m1, ported TB, 4.10 gears,14"k&n, gibson exhaust,msd,msd retard control.mopar computer jba headers and 150shot
|
Duner
Dodge Dakota
11/28/2001
19:34:17
| RE: Duner
IP: Logged
Message:
Oh, Just a little bit of work. LOL
That's as bad as me saying I've been down the track a couple of times! hahaha
How quick is it off the bottle? And what part of the country are you in?
|
litl punisher
Dodge Dakota
11/28/2001
20:15:01
| RE: Duner
IP: Logged
Message:
i'm happy with the quickness. 1.8 60ft &8.3 i'm guessing in the eigth. I have a problem with wanting to go faster. the truck started a 16.8. Now i'm putting a 340 in with maybe a 300 shot of nos. It should be on the dyno with in a week or two. where i'm from ? you'll never guess MAINE.
Where you from.
|
Duner
Dodge Dakota
11/28/2001
20:44:36
| RE: Duner
IP: Logged
Message:
I don't know of many people who are happy with however quick their vehicle goes. Can you say too much is never enough? hehehe
Wow - 300 shot? Be careful! I've seen the results from a 300 shot hit..... lots of extra parts! hahaha
I'm at almost the opposite corner of the country..... Phoenix, AZ. Good luck on your new engine and with the dyno pulls. I'm hoping to get mine on a dyno fairly soon also.
|
litl punisher
Dodge Dakota
11/28/2001
21:00:07
| RE: Duner
IP: Logged
Message:
you can't be afraid of what can happen. but hope for what can it do. Precations taken, retard box,head studs. SAVINGS ACCOUNT
|
SuperDak
Dodge Dakota
11/28/2001
22:46:18
| RE: Duner
IP: Logged
Message:
duner are you beating lightinings? it would be something if i could get my 4.7 to run a 12.7!
|
kota on 20s
GenIII
 
11/29/2001
01:10:53
| RE: Duner
IP: Logged
Message:
wow, im VERRY impressed! looks goooood, like factory installed. verry well thought out and best of all, it works! it must feel good to have the balls to tare into a new truck and HOPE it works.
MAJOR PROPS TO YOU DUNNER!!!!
just wondering is there any problems that you didnt expect?
Eric
|
4wDakota
Dodge Dakota
11/29/2001
09:07:31
| RE: Duner
IP: Logged
Message:
Hey Duner, Are those times with slicks or with your 17" R/T's
|
Duner
Dodge Dakota
11/29/2001
10:43:08
| Thanks Guys!
IP: Logged
Message:
The only unexpected part of the install was how fast it went. There were no problems at all. I only expected mid 13s out of it and hoped it would run at least a high 13 for sure. If it only ran 14s I would have been embarrased.... 12s and I was exstatic!
The 12.76 @ 107.77 mph was with ET streets (28x11.5x15). I only tried a few runs without the slicks - and the best run was a 13.18 @ 106 mph. It's fun to drive without the slicks... but wheelspin is a problem. It hooks quite a bit better on the street - the track is always slippery with street tires.
It spanks Lightnings pretty well right now.
Obviously it won't spank all of them.... those Lightning guys do mods too! hehehe
|
litl punisher
Dodge Dakota
11/29/2001
17:23:31
| RE: Duner
IP: Logged
Message:
Are you running the stock cam and injectors.
|
Duner
Dodge Dakota
11/29/2001
17:39:09
| RE: Duner
IP: Logged
Message:
I'm running the stock cam and injectors.
The only other cams available for it so far are from the 4.7 HO that comes in the 2002 Jeep GCs. Right now I'm using higher fuel pressures to tune the engine under boost. I plan on changing that set-up with larger injectors and some additional computer work.
|
Riv
Dodge Dakota
JOIN HERE
12/23/2008
17:58:04
| RE: Duner
IP: Logged
Message:
Hey Duner you still out there, someone elses suggested that get in touch with you, I'm trying to put together a turbo system for my 00R/T, found this old thread with your name on it.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
