| From | Message |
cudashoe
Dodge Dakota
JOIN HERE
6/11/2002
23:01:57
|
 Subject: RE: 4.7L Billet Throttle Body - Dyno Sheet
IP: Logged
Message:
BTT
|
cudashoe
Dodge Dakota
JOIN HERE
6/11/2002
23:03:57
| RE: 4.7L Billet Throttle Body - Dyno Sheet
IP: Logged
Message:
Where are those dyno numbers??
Read Matt Barrets post about little or no gain from 65 to 68.
Bigger TBs provide minimal gain at maximum price.
|
alex
Dodge Dakota
JOIN HERE
6/12/2002
08:38:01
|  RE: 4.7L Billet Throttle Body - Dyno Sheet
IP: Logged
Message:
Dude, what is your freakin' point???
Don't buy the throttlebody. It is very clear that you only have $500 to spend on your truck. You absolutely WILL get more power for $500 from a PCM upgrade. So stick with that.
The rest of us (me included) are going to be spending more than $500, so we will be buying both the PCM and the throttlebody.
But, please just LET IT GO!! You are really going to a lot of effort to prove that 18 hp is more than 10 hp. Just stop!!
|
CW
GenIII
6/12/2002
08:58:14
|  RE: 4.7L Billet Throttle Body - Dyno Sheet
IP: Logged
Message:
That was also before Matt hollowed out his third cat.
2001 4.7HO RC 5sp 3.92 LSD
Click on thumbnail for mods.
|
Bernd
*GenIII*
6/12/2002
09:01:24
| RE: 4.7L Billet Throttle Body - Dyno Sheet
IP: Logged
Message:
Yup.
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
cudashoe
Dodge Dakota
JOIN HERE
6/12/2002
10:28:14
| RE: 4.7L Billet Throttle Body - Dyno Sheet
IP: Logged
Message:
Alex- for the record.
I have a 2000 RC 4.7 5 - speed, 3.92 sure grip and ITS PAID FOR, I bought it new and paid cash.(love the look on the salesman face when I whipped out$15,500!!!)
I have FULL Hotchkis with the Bilstiens, MBRP w/cuda tips. Hard tonue cover. AAR cuda hood. IAT, ect ect, oh yes I ALREADY HAVE the Leach PCM,and removed 3rd cat.
I have over $5000 in mods to my truck already. The Kenne-Bell is next for me.
And
So Alex- I can afford ANY TB out there, but they aint worth the price,AND THEY HURT DRIVABILITY!!!!
OH and the TB DONT produce 10 hp UNLESS you have intake and exhaust already. Hell those alone will give you 10.
|
alex
Dodge Dakota
JOIN HERE
6/12/2002
11:18:03
| RE: 4.7L Billet Throttle Body - Dyno Sheet
IP: Logged
Message:
How do you know that they hurt the drivability?
|
CThomp
Dodge Dakota
JOIN HERE
6/12/2002
11:38:44
| RE: 4.7L Billet Throttle Body - Dyno Sheet
IP: Logged
Message:
My TB didn't hurt my drivability. If anything it helped.
|
crm
Dodge Dakota
JOIN HERE
6/12/2002
11:46:44
| RE: 4.7L Billet Throttle Body - Dyno Sheet
IP: Logged
Message:
i think cudashoe must have installed his backwards
|
alex
Dodge Dakota
JOIN HERE
6/12/2002
11:46:46
|  RE: 4.7L Billet Throttle Body - Dyno Sheet
IP: Logged
Message:
It pretty much helped mine too. Like it made it REALLY drivable from 2000 rom on up to 5500 rpm.
|
cudashoe
Dodge Dakota
JOIN HERE
6/12/2002
11:59:52
| RE: 4.7L Billet Throttle Body - Dyno Sheet
IP: Logged
Message:
How they hurt?
1. MAJOR low-end loss
2. POOR IDLE, very irratic
3. PEDAL VIBRATION
My truck Idles at 650 PERFECTLY everytime.
|
D
Dodge Dakota
JOIN HERE
6/12/2002
12:22:45
| RE: 4.7L Billet Throttle Body - Dyno Sheet
IP: Logged
Message:
your gonna run a kenne bell without a larger
TB???? good luck, thats like trying to drink a
soda through a coffee stirrer. cept, well you
get my point.
|
CThomp
Dodge Dakota
JOIN HERE
6/12/2002
12:54:17
| RE: 4.7L Billet Throttle Body - Dyno Sheet
IP: Logged
Message:
I have a larger TB and it idles perfectly everytime too. I gained low end. I've never experienced any pedal vibration.
Oh yeah by the way I have a Fastman TB on a '00 4.7L 2wd 5spd
|
cudashoe
Dodge Dakota
JOIN HERE
6/12/2002
13:40:39
| RE: 4.7L Billet Throttle Body - Dyno Sheet
IP: Logged
Message:
well my understanding is the Kenne-Bell works well regaurdless of the TB.
and D- the 72mm only adds less than one percent more area. It cant be much of a difference.
|
cudashoe
Dodge Dakota
JOIN HERE
6/12/2002
13:48:12
| RE: 4.7L Billet Throttle Body - Dyno Sheet
IP: Logged
Message:
sorry that 10 percent
|
conig
Dodge Dakota
JOIN HERE
6/12/2002
14:14:03
| RE: 4.7L Billet Throttle Body - Dyno Sheet
IP: Logged
Message:
just to point something out I don't remember seeing any of the throttle bodies have ing a flat throttle bar like a bbk or name brand throttle body. or a knife edged throttle plate.
so it appears to me all any of them are is bored out throttle bodies, something you can get done at almost any speed shop for $100 +-
|
| | <<Previous Page P 2 Next Page>> |
