| From | Message |
D2K
Dodge Dakota
11/05/2001
16:58:45
|
 Subject: Were the F&B 4.7 TBs as good as hyped?
IP: Logged
Message:
Quick survey of how the 4.7 TBs have been working... with three(?) sizes to choose from, what's the hot tip?
Chris
D2K - '00 4.7L Durango SLT+ (loaded)
|
Horbedarn
*GenIII*
11/05/2001
21:19:41
|  RE: Were the F&B 4.7 TBs as good as hyped?
IP: Logged
Message:
I have the 72 mm TB and the 4" Z-Tube to go with it and it made a noticable difference in torque, HP, and sound. I am pleased with it.
2000, CC, SLT, 4x4, 4.7, 3.55, Auto
Borla Cat-Back, 72mm TB, 4" Z-Tube, 3923's, 180 T-Stat
MTX Amped Thunderform
|
Dr.Q
Dodge Dakota
11/05/2001
23:47:46
|  RE: Were the F&B 4.7 TBs as good as hyped?
IP: Logged
Message:
Was it worth the $600.00?
Q
|
Python97
Dodge Dakota
11/06/2001
09:35:32
| RE: Were the F&B 4.7 TBs as good as hyped?
IP: Logged
Message:
same question here. Did you feel the difference. Before I put a small hole in my pocket I wanted to know the same thing :)
|
Will
Dodge Dakota
11/06/2001
09:43:53
| RE: Were the F&B 4.7 TBs as good as hyped?
IP: Logged
Message:
I would think Bernd and Matt might have some before and after Dyno sheets for us now. Right now all I've seen is the sheet for the 69 mm prototype.
Anyone know if 70 mm TB will work with the new K&N FIPK for the 4.7?
|
Horbedarn
*GenIII*
11/06/2001
22:07:35
| RE: Were the F&B 4.7 TBs as good as hyped?
IP: Logged
Message:
I know that it was a lot of money and I should have bought a supercharger to start with and be done with it but adding all these little mods and then a supercharger makes a big difference. I did feel a noticable difference in low end torque, in the mid range where it pulls harder now, and high end hp. The sound is also better at 3/4 to WOT. I had an AirRaid system before I put the TB and Z-Tube on. When I had put the AirRaid system on I felt a difference then, so if you are at stock air intake now you would probably feel more than I did. I like the mod but it is a lot of money.
2000, CC, SLT, 4x4, 4.7, 3.55, Auto
Borla Cat-Back, 72mm TB, 4" Z-Tube, 3923's, 180 T-Stat
MTX Amped Thunderform
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
