Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
22:57:52 - 04/25/2024

Dakota Performance
FromMessage
Dodge Boyz
Dodge Dakota
 Email

9/04/2001
15:49:43

Subject: what TB to put on my 2001 3.9?
IP: Logged

Message:
I was wanting to know what throttle body works best with my 3.9 dak. I will probably get one before Christmas, I have heard different things, but I also heard that a standard V8 conversion would work best, because larger ones would bogg my truck down and lose low end torque.



lattimer
Dodge Dakota
 Email

9/05/2001
11:22:18

RE: what TB to put on my 2001 3.9?
IP: Logged

Message:
I put a FLowmetrics 48mm TB on my 2000 3.9. It works really well. I used to experience a slight bog coming off idle, but I turned the idle screw up till the truck idles at about 750 RPM when hot. That took care of the bog. Otherwise, the only problem I had was a loose screw in the linkage, I took it out and locktighted it back in, no more problems.

Shawn



THEUFO1
Dodge Dakota
 Email

9/05/2001
14:49:32

RE: what TB to put on my 2001 3.9?
IP: Logged

Message:
Go with the 50mm tb if you plan on doing a lot more mods, 48 is good for minor mods. If you plan on supercharging get the 50mm.



cbsdakota
GenIII
 Email User Profile


9/05/2001
17:42:01

RE: what TB to put on my 2001 3.9?
IP: Logged

Message:
The ONLY way you should put on a 50mm is if you already have a supercharger in place. DO NOT run your truck with a 50mm TB and no blower. Would bog down real bad. Probably would only run decent at wide open throttle.

Project QUIKV6

Dodge Boyz
Dodge Dakota
 Email

9/05/2001
18:22:58

RE: what TB to put on my 2001 3.9?
IP: Logged

Message:
Hey thanks guys, I'm deciding on getting either a stock 48mm conversion from Bernd or a 48mm Billet from speedtweaks(flowmetrics). Does anybody have any coments on either of the two? If so please reply, Thanks.

Nate Dogg



Kris239
*DakotaEnthusiast*
 User Profile


9/05/2001
21:18:24

RE: what TB to put on my 2001 3.9?
IP: Logged

Message:
I like my 48mm but I wish I didn't pay $390 for it. I heard the Flometrics made 2HP's and 12 lbs. per foot more than the stock 5.2 TB. Since budget should come to mind, I wish I got the V8 TB for $1??-$2??.

Kris Harnack
1994 Dodge Dakota SLT
3.9L V6 / RC / SB / Auto

Marc 99R/T
Dodge Dakota
 Email

9/06/2001
10:48:33

RE: what TB to put on my 2001 3.9?
IP: Logged

Message:
I have an extra V8 TB (all sensors are still attached) and accelerator cable I could sell you for a reasonible price. Let me know...

pmmjrfefejuno.com

Marc 99 R/T with a alot of cool stuff



cbsdakota
GenIII
 Email User Profile


9/06/2001
12:43:44

RE: what TB to put on my 2001 3.9?
IP: Logged

Message:
The stock V8 TB will kill your torque. You need either a Flometrics 48mm or the Fastman TB ($250)

Project QUIKV6

blueballs
Dodge Dakota
 Email

9/08/2001
01:26:31

RE: what TB to put on my 2001 3.9?
IP: Logged

Message:
what is the diff from the stock 318 tb vs brand names for the 3.9



Marc 99 R/T
Dodge Dakota
 Email

9/08/2001
02:12:39

RE: what TB to put on my 2001 3.9?
IP: Logged

Message:
Lose bottom-end whatever, if you do not compensate for allowing your engine to breath better, you will lose torque. I ran a V8tb on my 97 dakota for several months with very little loss of bottom-end. I had several other mods to compensate for example MSD ignition, 8.5mm wires, blaster SS coil, Jet 2 module, 180 degree thermostat, and nothing less than 92 octane. As for allowing my truck to breath I also installed JBA headers, cold air intake, & a 3" single outlet K&N exhaust system. My truck was pretty darn bad a$$.
I would of never considered getting rid of my V6 until I had the opportunity to get a RT dakota for a great price.

As for your question mr. balls about $200.



cbsdakota
GenIII
 Email User Profile


9/08/2001
04:51:48

RE: what TB to put on my 2001 3.9?
IP: Logged

Message:
The stock V8 has bigger bores which would allow more flow, yes, but a ported TB will flow better allowing a higher air velocity. Stock will work, ported is better. Just a budget thing I guess. You could buy the stock and port it yourself. The only ported 48mm is the Flometrics. Fastman only makes a 46, 50+.

Project QUIKV6

jason
Dodge Dakota


11/27/2001
10:35:39

RE: what TB to put on my 2001 3.9?
IP: Logged

Message:
BlueBalls huh? Thats too bad.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.