| From | Message |
Justin Whitt
Dodge Dakota
7/25/2001
17:59:31
|
 Subject: Where can i get a 70mm TB for my 4.7
IP: Logged
Message:
where can i get a 70mm tb and for the best price
what would the HP gain be on that.....
also anybody know how much more Hp a 72mm TB
will give a 01 4.7
Thanks
01 4x4 CC 4.7 5spd 3.92 dual cat-back 4inch pvc
pipe cold air 9inch cone K&N....180 thermostat
on it's way and JET STAGE II chip.....
thanks for the help any suggestions help
|
bernd
Gen III
7/27/2001
01:16:06
| RE: Where can i get a 70mm TB for my 4.7
IP: Logged
Message:
The promotional "Performance Kit" will be released in the first week of August (when the 70 and 72mm TB's are ready for shipping).
1997 Dodge Dakota SLT - V6
Supercharged @ 10#
|
Art
Dodge Dakota
7/27/2001
03:03:57
| RE: Where can i get a 70mm TB for my 4.7
IP: Logged
Message:
Here`s a kit for you to make Bernd,72mm T/B,and a
ATI procharger to go with it,get on it :)
|
bernd
Gen III
7/27/2001
08:43:00
|  RE: Where can i get a 70mm TB for my 4.7
IP: Logged
Message:
Hehehehe....first things first though. ;)
(Gotta get the TB's finally released.)
1997 Dodge Dakota SLT - V6
Supercharged @ 10#
|
Matt Barret
Dodge Dakota
7/27/2001
10:07:35
| RE: Where can i get a 70mm TB for my 4.7
IP: Logged
Message:
I'll be testing the 70mm and 72mm TB very soon for Bruce, road testing AND Dyno testing. Keep watching for the results, I'll post them as soon as I get them.
Matt Y2K-HEMI
'00 RC 4.7L 5spd
14.23@94.49
|
Stuart
Dodge Dakota
7/28/2001
01:23:47
| RE: Where can i get a 70mm TB for my 4.7
IP: Logged
Message:
I was reading over on the moparchat board, and I ran into a thread that said the current z-tube would not fit a 70mm throttle body, and that a larger z-tube was in the works.
Is this true, and if so, when will the larger z-tube be released? Also, will the FIPK for the 4.7 fit the 70mm throttle body?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
