| From | Message |
jesse
Dodge Dakota
JOIN HERE
8/03/2009
17:50:24
|
 Subject: 2008 4.7intake manifold for 99-07dakotas
IP: Logged
Message:
i have a 2003 4.7 and im thinking about putting the 2008 intake manifold on my truck. but theres one thing i notced and thats is where do the throttle cable and the othere cable sit on or clip on? like on our 2003 intake manifold. has anybody donethis yet or even heard of it. if so id really like to know how to modify it to work for my truck.
|
daddio
Dodge Dakota
JOIN HERE
8/03/2009
22:41:59
| RE: 2008 4.7intake manifold for 99-07dakotas
IP: Logged
Message:
IIRC, isn't the '08 a drive by wire? If so there is not throttle cable or trans TV cable.
|
AIR_RAM
Dodge Dakota
JOIN HERE
8/19/2009
19:08:23
| RE: 2008 4.7intake manifold for 99-07dakotas
IP: Logged
Message:
We offer throttle body adapter plates that allow you to bolt your 1999-2007 throttle body to the 2008-2009 intake.
Check them out on our site at www.AIRRAM.com
SPEED SAFE, AIR RAM
|
AIR_RAM
Dodge Dakota
JOIN HERE
8/19/2009
19:20:54
| RE: 2008 4.7intake manifold for 99-07dakotas
IP: Logged
Message:
Also, I must add, the 2008 will outperform the 2002 H/O intake and or the 2003-2007 Intake. Every customer who has done this mod has been more then pleased with it.
If your 4.7L has an EGR then you will need an EGR delete. The EGR is in the way of the 2008 Intake and there is no way the 2008 Intake will fit wth the EGR installed. This starts in 2004 I beleive.
To Delete your EGR you will need the EGR block off plate & SCT tune to have it removed from the PCM. Sure the SCT is more money... but it will make MUCH MORE HP.
SPEED SAEF, AIR RAM
|
Marx
Dodge Dakota
JOIN HERE
8/22/2009
17:49:21
| RE: 2008 4.7intake manifold for 99-07dakotas
IP: Logged
Message:
"The EGR is in the way of the 2008 Intake and there is no way the 2008 Intake will fit wth the EGR installed. This starts in 2004 I beleive."
Well, if you're not sure when it started, how do you know which engine needs the EGR delete kit?
Where is this EGR so we can look for it?
The fact that you admit you don't know, means I may or may not get what I need, or I may needlessly buy more than required.
|
AIRRAM
Dodge Dakota
JOIN HERE
8/22/2009
21:39:32
| RE: 2008 4.7intake manifold for 99-07dakotas
IP: Logged
Message:
The easiest way to know is to pop your hood and look and see if you have an EGR. The EGR would be located on the DRIVERS SIDE HEAD at the back... It will be a canister shaped about the size of a coke can.
If you have an EGR... Then you need to remove it in order to mount the 2008 Intake. You will also need to have the EGR deleted on your PCM with a custom tune.
SPEED SAFE, AIR RAM
|
Josh
Dodge Dakota
JOIN HERE
8/23/2009
11:38:18
| RE: 2008 4.7intake manifold for 99-07dakotas
IP: Logged
Message:
Hey. What years have this EGR? I thought the 4.7L didn't need it.
|
Harv
Dodge Dakota
JOIN HERE
9/24/2009
22:46:31
| RE: 2008 4.7intake manifold for 99-07dakotas
IP: Logged
Message:
True. The 4.7L engine doesn't have EGR.
|
hmmmmm
Dodge Dakota
JOIN HERE
9/24/2009
23:58:10
| RE: 2008 4.7intake manifold for 99-07dakotas
IP: Logged
Message:
Well if AIRRAM didn't know that
Then how much faith would you have in his products
|
AIR_RAM
Dodge Dakota
JOIN HERE
11/08/2010
20:08:32
| RE: 2008 4.7intake manifold for 99-07dakotas
IP: Logged
Message:
LOL... The 4.7L does have an EGR... Just not all of them. From 1999-2002 the 4.7L does not have an EGR... But from 2003-2010 they all have EGR.
If you want to run the 2008 intake on the 2006-2007 4.7L engines you will need to pick up the 2008 EGR. This will allow the 2008 intake to mount to the 2006-2007 4.7L engines.
I appologize for the information overload...
SPEED SAFE, NICK
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
