Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
03:03:41 - 03/29/2024

Dakota Performance
FromMessage
godawgz
Dodge Dakota
JOIN HERE
 Email

1/23/2007
22:03:24

Subject: intakes
IP: Logged

Message:
hughes racing told me there intakes out perform the m1. does anyone have any dyno results or words of wisdom before i spend my hard earned $$$$.



Kenny
Dodge Dakota
JOIN HERE
 Email

2/04/2007
14:30:51

RE: intakes
IP: Logged

Message:
hmmm it may flow more, who knows but it won't do you any good on a stock engine, now if you had a cam better flowing heads throttle body etc etc then maybe. but I think the M1 is all you need on these trucks, unless ur building a race car...



jjj
Dodge Dakota
JOIN HERE
 Email

2/04/2007
22:39:08

RE: intakes
IP: Logged

Message:
I believe it is a better street intake than the M1.
It is the modified stocker correct?



Chris Dowling
Dodge Dakota
JOIN HERE
 Email

2/12/2007
01:10:02

RE: intakes
IP: Logged

Message:
Hey, about the M1... It is a direct replacment for the stock intake manifold on a 2001 R/T 5.9?? When I look at the details about it at summit it says its for an aftermarket block ( pn#5007381) And my throttle body and space will bolt right up to the m1 correct?? Sorry to change the subject of the thread a little but Im new to 5.9's... Just bought mine a week ago...



SinCity R/T
Dodge Dakota
JOIN HERE
 Email

2/12/2007
16:05:34

RE: intakes
IP: Logged

Message:
The M1-2bbl intake manifold is a direct bolt-on for the 5.9L motor, requires no modifications to the throttle body (50mm-53mm) or fuel rails. You will need the Mopar M1 installation kit and a new set of intake manifold gaskets, and you might as well get a 180-degree thermostat & new gasket since you have to pop off the upper radiator hose anyways.

SinCity R/T
http://www.dakota-durango.com



Chris Dowling
Dodge Dakota
JOIN HERE
 Email

2/12/2007
23:38:11

RE: intakes
IP: Logged

Message:
Well at summit it refers to the m1 by mopar as a dual plane, square bore flange intake for the 5.9, nothing about 2bbl which I thought has to do with if you want to run a carb?? I dont know, just trying to understand better.. Also the m1 install kit says its only for the single plane.. Do I still need the kit for the dual plane??



R/T STEVE
Dodge Dakota
JOIN HERE
 Email

2/13/2007
13:57:24

RE: intakes
IP: Logged

Message:
MY BUDDY GAVE ME AN M1 INTAKE SET UP FOR A 4BB THROTTLE BODY DOES ANY ONE KNOW WHERE I CAN GET AN ADAPTER FOR THE STOCK 2BB THROTTLE BODY.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.