| From | Message |
trucky
Dodge Dakota
JOIN HERE
4/25/2006
00:20:08
|
 Subject: headerss
IP: Logged
Message:
i want gibson headers but is ceramic or chrome ok? stainless steel is only there for looks and keeping rust away right? is it worth the extra 200$??
|
ScojoDak
Dodge Dakota
JOIN HERE
4/25/2006
00:42:12
| RE: headerss
IP: Logged
Message:
Go ceramic. Trust me, it's worth the money. Keeps engine bay temps low and retains the "near new" look for a long time.
|
trucky
Dodge Dakota
JOIN HERE
4/25/2006
17:19:47
| RE: headerss
IP: Logged
Message:
but those are like 650...if i found a deal im willing to pay 500 tops for headers...
|
Joey
Dodge Dakota
JOIN HERE
4/25/2006
20:47:46
| RE: headerss
IP: Logged
Message:
i have used stainless steel ones. they are no longer shiny but they def get the job done. sellin them for 200 bucks. want them?? go for 463 new.
|
ScojoDak
Dodge Dakota
JOIN HERE
4/25/2006
22:02:24
| RE: headerss
IP: Logged
Message:
There are "stainless steel" headers that CAN and WILL rust. I have a set of uncoated JBA headers that are made of stainless steel and they are now rusted in appearance. Many people think that materials made of stainless steel wont rust or corrode. There are various grades of stainless steels that will rust/corrode and many grades that wont. The grades that wont rust/corrode are more expensive and dont work well with header applications.
|
trucky
Dodge Dakota
JOIN HERE
4/26/2006
01:49:39
| RE: headerss
IP: Logged
Message:
i dont care about looks, i want performance...how much joey...and is it gibson
|
trucky
Dodge Dakota
JOIN HERE
4/26/2006
01:54:29
| RE: headerss
IP: Logged
Message:
oh sorry you said 200...ok but gibson? and for an 05?
|
RaZoR1
Dodge Dakota
JOIN HERE
4/26/2006
17:24:46
| RE: headerss
IP: Logged
Message:
YOu have the 4.7?? Headers are not going to do much for performance. Depending on your set-up.
|
Adam
Dodge Dakota
JOIN HERE
4/26/2006
23:26:47
| RE: headerss
IP: Logged
Message:
Anyone know if its possible to find headers for the V6 w/out spending $600? I found some for 2something but they were for an older dak. What's the difference between the years for them to change? Also some specify for 2wd and 4wd...why? I'm getting bored so I figure I'll spend time on my truck.
'00 CC Sport 4x4 5spd 3.9
|
01_dak
Dodge Dakota
JOIN HERE
4/27/2006
00:17:55
| RE: headerss
IP: Logged
Message:
Try www.stillen.com, I think I saw a set of headers for about 375
|
shatto
Dodge Dakota
JOIN HERE
4/27/2006
01:29:33
| RE: headerss
IP: Logged
Message:
My Gibsons have a rust coloring, I think, hell, I don't know, I never look.
Point you might think about is how much driving you do. My exhaust lasts almost forever because the truck runs a couple hundred miles a day. Less driving=less heat to dry things out.
You might look into wrapping them before installation.
|
Mr Exhaust
Dodge Dakota
JOIN HERE
4/27/2006
09:31:26
| RE: headerss
IP: Logged
Message:
do not wrap the headers on a street truck or car. this will for sure induce condensation!
|
Shatto
Dodge Dakota
JOIN HERE
4/27/2006
09:36:12
| RE: headerss
IP: Logged
Message:
An example of why it is a good idea to identify your location.
The Weather Channel copied Animal Planet and had a "Wettest City-Driest City" the other night.
Interestingly, San Francisco is one of the top five dryest cities!
How would I know about wrapping and rust?
|
Mr Exhaust
Dodge Dakota
JOIN HERE
4/27/2006
15:05:24
| RE: headerss
IP: Logged
Message:
for those who want to know about wrapping headers, check the link below.
http://www.centuryperformance.com/heatwraps.asp
|
Joey
Dodge Dakota
JOIN HERE
5/02/2006
02:10:45
| RE: headerss
IP: Logged
Message:
no they are for the 5.2/5.9 motors. wont fit the 4.7 motors. still have the headers for sale for 200 shipped if anyone wants them. they are boxed up and ready to go.
|
Nitro Junkie
R/T
5/02/2006
15:22:06
| RE: headerss
IP: Logged
Message:
I just put a set of Edlebrock Shorty headers on and in huge bold lettering it stated WRAPPING THESE HEADERS WILL VOID THE WARRENTY (on the headers of course)
2000 R/T
Belltech 2
|
Joey
Dodge Dakota
JOIN HERE
5/11/2006
01:15:55
| RE: headerss
IP: Logged
Message:
anyone?? im sure someone on here needs a set of headers. gibson stainless steel. $200 shipped, they go for $460 new.
|
Xrated
Dodge Dakota
JOIN HERE
5/11/2006
01:30:37
| RE: headerss
IP: Logged
Message:
they are for wich kind of truck? 2wd 4wd , 318 , 4.7? wich year?
|
Joey
Dodge Dakota
JOIN HERE
5/12/2006
00:38:14
| RE: headerss
IP: Logged
Message:
they are for any 5.2 or 5.9 dakota or ram. 2wd 4wd doesnt matter it will fit them all. im assuming anything 1996 or later because earlier years had EGR but even then they will still fit but just need an extra egr hookup
|
Joey
Dodge Dakota
JOIN HERE
5/12/2006
16:12:38
| RE: headerss
IP: Logged
Message:
id like 200 shipped but if ur serious about buying them ill negotiate.
|
Joey
Dodge Dakota
JOIN HERE
5/16/2006
16:37:12
| RE: headerss
IP: Logged
Message:
come on someone on here must need some headers. $180 shipped stainless steel come on guys. ill even shine them up wit the wire brush and get rid of all the oxidation so they will look like new. great deal as i paid 460 for these things. they will outlast ur truck.
|
| | P 1 Next Page>> |
