| From | Message |
jon
Dodge Dakota
JOIN HERE
3/09/2006
16:07:30
|
 Subject: pulleys
IP: Logged
Message:
is it worth getting a light wieght pulley for my 99 3.9?
|
Geoff
GenIII
 
3/10/2006
03:18:04
| RE: pulleys
IP: Logged
Message:
Not sure about light weight pulleys but i have an underdrive crank pulley on my 2000 3.9L i did that and removed the clutch fan at the same time and noticed a difference
I'm about to sell it if you are interested in the pulley
sgtgeo@hotmail.com
Geoff
2000 3.9L RC Sport. Flame Red. 5-speed, 3.55, Airaid, Vortex Muffler, F&B 48mm TB, 180 T-Stat, Autolite 3923s, IAT Adjuster, Clear Corners, SS Grill Insert, JBA Plug Wires, Underdrive Crank Pulley. Hurst Shifter, Removed Clutch Fan, Sony CDX-MP450X MP3, JBA Headers
|
crow318
Dodge Dakota
JOIN HERE
3/10/2006
08:01:37
| RE: pulleys
IP: Logged
Message:
Any time you can lighten the rotating mass of an engine, you stand to gain performance and fuel economy. Unfortunately, the cost of these modifications usually outweights the performance gains.
How much is the pully?
|
Adam
Dodge Dakota
JOIN HERE
3/10/2006
15:03:28
| RE: pulleys
IP: Logged
Message:
Are you selling the truck or just the pulley? Just wondering if there's somethin wrong with the pulley? Charging problems or anything like that.
|
Geoff
GenIII
3/10/2006
18:36:39
| RE: pulleys
IP: Logged
Message:
Pulley is sold
No problems had it on there for a long time. Just selling the truck
Also selling a Flowmetrics Billet TB and a few other things
see my post in the V6 section
Geoff
2000 3.9L RC Sport. Flame Red. 5-speed, 3.55, Airaid, Vortex Muffler, F&B 48mm TB, 180 T-Stat, Autolite 3923s, IAT Adjuster, Clear Corners, SS Grill Insert, JBA Plug Wires, Underdrive Crank Pulley. Hurst Shifter, Removed Clutch Fan, Sony CDX-MP450X MP3, JBA Headers
|
Brad
Dodge Dakota
JOIN HERE
3/12/2006
18:49:15
| RE: pulleys
IP: Logged
Message:
We have them in stock if you need one .
www.strippermotorsports.com
|
jon
Dodge Dakota
JOIN HERE
3/13/2006
13:21:52
| RE: pulleys
IP: Logged
Message:
how much do you want for the throttle body?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
